Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
[NUM. OF PRINTS] You can set the number of prints up to 999. - 187 Connecting to other equipment [PAPER SIZE] Item Description of settings { Settings on the printer are prioritized. [L/3.5qk5q] 89 mmk127 mm [2L/5qk7q] 127 mmk178 mm [POSTCARD] 100 mmk148 mm [16:9] 101.6 mmk180.6 mm [A4] 210 mmk297 mm [A3] 297 mmk420 mm [10k15cm] 100 mmk150 mm [4qk6q] 101.6 mmk152.4 mm [8qk10q] 203.2 mmk254 mm [LETTER] 216 mmk279.4 mm [CARD SIZE] 54 mmk85.6 mm • Paper sizes not supported by the printer will not be displayed. - 188 Connecting to other equipment [PAGE LAYOUT] (Layouts for printing that can be set with this unit) Item Description of settings { Settings on the printer are prioritized. a 1 picture with no frame on 1 page a 1 picture with a frame on 1 page a 2 pictures on 1 page a 4 pictures on 1 page • An item cannot be selected if the printer does not support the page layout. .Layout printing When printing a picture several times on 1 sheet of paper For example, if you want to print the same picture 4 times on 1 sheet of paper, set [PAGE LAYOUT] to [a] and then set [NUM. OF PRINTS] to 4 for the picture that you want to print. When printing different pictures on 1 sheet of paper For example, if you want to print 4 different pictures on 1 sheet of paper, set [PAGE LAYOUT] to [a] and then set [NUM. OF PRINTS] to 1 for each of the 4 pictures. Note • The camera is receiving an error message from the printer when the [.] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer. • If the number of prints is high, the pictures may be printed several times. In this case, the remaining number of prints indicated may differ from the number set. • When the pictures in RAW files are to be printed, the JPEG pictures recorded simultaneouslyby the camera will be printed. If JPEG pictures do not exit, RAW file pictures cannot be printed. - 189 Others Using the Conversion Lens (optional) With the optional conversion lenses, you can record even more faraway pictures and take close-up pictures of smaller subjects. Refer to P144 for details. Preparations: Remove the lens cap and lens hood. Attach the lens adapter. • Rotate the lens adapter slowly and carefully. Attach the tele conversion lens. A Lens adapter (DMW-LA5; optional) B Tele conversion lens (DMW-LT55; optional) • Close-up lens (DMW-LC55; optional) can be attached in a similar manner. Zoom magnification when a lens is attached (Max. number of pixels) Recordable range when using a conversion lens Wide Tele Tele conversion lens 12k-24k. 5.5 m (18.0 feet) to ¶ Close-up lens 4k-24k 18 cm (0.59 feet) to 50 cm (1.64 feet) 33 cm (1.09 feet) to 50 cm (1.64 feet) . The actual magnification when the zoom is used will be 1.7 times the display. - 190 Others Select [CONVERSION] on the [REC] menu. (P27) • Refer to P144 for [CONVERSION]. Press 3/4 to select [ ], and then press [MENU/SET] to set. • Set in same way to select [ C ] too. • Always set to [OFF] when the conversion lens is taken off. Note • Lens adapter (DMW-LA5; optional) is needed to use the conversion lens. • MC protector (DMW-LMC52; optional) or ND filters (DMW-LND52; optional) cannot be used together with the conversion lens. Remove them before attaching the conversion lens. • When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures. • When using the tele conversion lens: – We recommend using a tripod. – The Stabilizer Function may not work sufficiently. – The focus indication may light due to the jitter even if the subject is not focused. – The time required for focusing may become longer than usual. - 191 Others Using the Protector/Filter (optional) The MC protector (DMW-LMC52; optional) is a transparent filter which affects neither the colors nor the amount of light, so it can always be used to protect the camera’s lens. The ND filter (DMW-LND52; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the color balance. PL filter (DMW-LPL52; optional) will suppress the reflected light from a metal or non spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air), making it possible to take a picture with enhanced contrast. Turn the camera on. Rotate the zoom lever towards [L] (W), and set the lens barrel to Wide (1k). • Set [CONVERSION] to [OFF]. (P144) • Close the flash. Attach the filter. C A MC protector B ND filter C PL filter Note • Do not attach multiple filters at the same time. • If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much. • You cannot attach the filter when the lens hood is attached. • If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the camera. • Be careful not to get a fingerprint, dirt, etc., on th...