Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фотоаппараты - DMCFZ28 (13.26 mb)
Фотоаппараты - DMCFZ28 (13.39 mb)
Фотоаппараты - DMCFZ28 (2.39 mb)
Фрагмент инструкции
(P22) Press 2/1 to select the picture and then press [MENU/SET] to start audio recording. • The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Press 3 to select [YES] and then press [MENU/SET] to start audio recording. (The original audio is overwritten.) • Audio is recorded from the built-in microphone on the camera. • If you press [‚], the audio dubbing is canceled. Press [MENU/SET] to stop recording. • It will automatically stop after recording about 10 seconds without pressing [MENU/SET]. Press [‚] to return to the menu screen. • Press [MENU/SET] to close the menu. Note • Audio dubbing may not work properly on pictures recorded by other equipment. S [COPY] You can copy the data of the pictures you have taken from the built-in memory to a card or from a card to the built-in memory. Select [COPY] on the [PLAYBACK] mode menu. (P22) Press 3/4 to select the copy destination and then press [MENU/SET]. : All the picture data in the built-in memory are copied onto the card at one time. > step 4. : One picture at a time is copied from the card to the built-in memory. > step 3. 110 VQT1S36 Advanced (Playback) Press 2/1 to select the picture and then press [MENU/SET]. Press 3 to select [YES], and then press [MENU/ SET]. • If you press [MENU/SET] while copying pictures from the built-in memory to the card, the copying will stop halfway. • Do not turn the camera off at any point during the copying process. Press [‚] to return to the menu screen. • Press [MENU/SET] to close the menu. • If you copy from the built-in memory to a card, all the pictures are copied and then the screen automatically returns to the playback screen. Note • If you copy picture data from the built-in memory to a card which does not have sufficient freespace, the picture data will only be copied halfway. We recommend using a card which has more free space than the built-in memory (about 50 MB). • If a picture exists with the same name (folder number/file number) as the picture to be copied in the copy destination when [ ] is selected, a new folder is created and the picture is copied. If a picture exists with the same name (folder number/file number) as the picture to be copied in the copy destination when [ ] is selected, that picture is not copied. (P129) • It may take time to copy the picture data. • Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied. (Even if the pictures were recorded with a Panasonic digital camera, you may not be able tocopy them if they were edited with a PC.) • DPOF settings on the original picture data will not be copied. Set the DPOF settings again after copying is finished. VQT1S36 111 112 VQT1S36 Connecting to other equipment to other equipment Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. • You can easily print out or mail the pictures you have imported. Use of the “PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenient way of doing this. • Read the separate operating instructions for the supplied software for more information about the software in the CD-ROM (supplied) and how to install it. Preparations: Turn on the camera and the PC. Remove the card before using the pictures in the built-in memory. Connect the camera to a PC via the USB connection cable A (supplied). • Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction. Press 3/4 to select [PC], and then press [MENU/ SET]. • If [USB MODE] (P28) is set to [PC] in the [SETUP] menu in advance, the camera will be automatically connected to the PC without displaying the [USB MODE] selection screen. Since there is no need to set this each time you connect to the PC, it is convenient. A USB connection cable (supplied) • Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause trouble.) B Align the marks, and insert. C AC adaptor (DMW-AC7PP; optional) • Use a battery with sufficient battery power or the AC adaptor (DMW-AC7PP; optional). If the remaining battery power becomes low during USB connection, the alarm beeps. Refer to “Disconnecting the USB connection cable safely” (P113) before disconnecting the USB connection cable. Otherwise, data may be destroyed. . . . USB MODE SELECT SET PLEASE SELECT THE USB MODE PictBridge(PTP) PC MENU Connecting to other equipment • When the camera has been connected to the PC with [USB MODE] set to[PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC] again. Double-click on [Removable Disk] in [My Computer]. • When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.) Double-click [DCIM] folder. Using a drag-and-drop operation, move ...