Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
:AUTO The flash is automatically activated according to the recording condition. : AUTO/Red-eye reduction The flash is automatically activated according to the recording condition. It reduces the red-eye phenomenon (eyes of the subject appear red in the picture) by triggering the flash before actually recording the picture. After that, the flash is activated for actual recording again. VQT0S57 • The flash is activated twice. The first flash is activated only for a preparation of actual recording. The subject should not move until the second flash is finished. • Use this when you take pictures of people in low lighting conditions. : Forced ON The flash is activated every time regardless of the recording condition. • Use this when your subject is back-lit or under fluorescent light. : Forced ON/Red-eye reduction • The flash setting is set to Forced ON/ Red-eye reduction only when you set [CANDLE LIGHT] (P61) or [PARTY] (P62) in scene mode. : Slow sync./Red-eye reduction When you take a picture with a dark background landscape, this feature makes the shutter speed slow when the flash is activated, so that the dark background landscape will become bright. Simultaneously it reduces the red-eye phenomenon. • Use this when you take pictures of people in front of a dark background. : Forced OFF The flash is not activated in any recording condition. • Use this when you take pictures in places where the use of the flash is not permitted. Recording pictures (basic) .Available flash settings by recording mode The available flash settings depend on the recording mode. (±: Available, —: Not available) .Not available in backlight compensation .The available flash range to take pictures ISO sensitivity Available flash control range Wide Tele AUTO 30 cm (0.98 feet) to 4.0 m (13.1 feet) 30 cm (0.98 feet) to 2.2 m (7.22 feet) ISO80 30 cm (0.98 feet) to 1.7 m (5.58 feet) 30 cm (0.98 feet) to 1.0 m (3.28 feet) ISO100 30 cm (0.98 feet) to 2.0 m (6.56 feet) 30 cm (0.98 feet) to 1.1 m (3.61 feet) ISO200 40 cm (1.31 feet) to 2.8 m (9.19 feet) 30 cm (0.98 feet) to 1.5 m (4.92 feet) ISO400 60 cm (1.97 feet) to 4.0 m (13.1 feet) 40 cm (1.31 feet) to 2.2 m (7.22 feet) • The available flash range is an approximation. • Refer to P31 for the focus range. • Refer to P69 for the ISO sensitivity. • If the ISO sensitivity is set to [AUTO] when using the flash, it will be automatically increased to a maximum of [ISO400]. • To avoid noise, we recommend decreasing the ISO sensitivity (P69) or setting [PICT.ADJ.] to [NATURAL]. (P76) VQT0S57 39 Recording pictures (basic) .Shutter speed for each flash setting Flash setting Shutter speed (Sec) : AUTO 1/60 to 1/2000 : AUTO/Red-eye reduction 1/60 to 1/2000 :Forced ON : Forced ON/Red-eye reduction 1/60 to 1/2000 : Slow sync./Red-eye reduction 1/8. to 1/2000 :Forced OFF 1/8. to 1/2000 .The shutter speed changes depending on the slow shutter setting. (P75) • There may be differences in the above shutter speeds in scene mode. – [NIGHT SCENERY] mode: 8 to 1/2000th – [BABY] mode (when using the flash): 1/30th to 1/2000th – [STARRY SKY] mode: 15 seconds, 30 seconds, 60 seconds • Do not stare at the photo flash from close proximity. • If you bring the flash too close to the subjects, they may be distorted or discolored by its heat and lighting. • Do not cover the photo flash with your fingers or any other items. • While the flash is being charged in economy mode, the LCD monitor is turned off. • The flash icon turns red when activating the flash and pressing the shutter button halfway. • When you take a picture beyond the flash control range, the exposure may not be adjusted properly and the picture may become bright or dark. • When you repeat taking a picture, recording may be disabled even if the flash is activated. Take a picture after the access indication disappears. • When the jitter alert appears, we recommend using the flash. • When you set to burst mode or auto bracket, only 1 picture is recorded for every flash activated. VQT0S57 • When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully. • When taking a picture with the flash, the white balance will be automatically adjusted [except for [ ] (Daylight)], but the white balance may not be properly adjusted if the flash level is insufficient. • When the shutter speed is fast, the flash effect may not be sufficient. Recording pictures (basic) Taking Pictures with the Self-timer 1 Select the self-timer mode. 3 : Self-timer set to 10 seconds ; : Self-timer set to 2 seconds ; No display: canceled 2 Take the picture. CANCEL MENU3 • A: Press the shutter button halfway to focus. • B: Press the shutter button fully to take the picture. • The self-timer indicator C blinks and the shutter is activated after 10 seconds (or 2 seconds). • If you press the [MENU] button when the self-timer is set, the self-timer setting is canceled. • When using a tripod or in other cases, setting the self...