Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
• Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. IMPORTANT INFORMATION About the disc changer connected: To connect a disc changer having switch to this unit, set the . Note that none of the KDC-C100, C205, C705, and non-Kenwood can be connected. You can damage both your unit and the CD changer if you connect them incorrectly. Precautions when connecting disc changers released in 1997 or earlier. The optional switching adapter KCA-S210A is necessary to connect a disc changer that is not equipped with the "O-N" switch except KDC-C100, KDC-C302, C205 and C705. Cleaning the Unit If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth. 2CAUTION Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters. — 3— Safety Precautions Safety Precautions FCC WARNING This equipment may frequency energy. Changes or modifications to this equipment may cause interference unless the modifications expressly approved in the instruction The user could lose the authority this equipment if an unauthorized modification is made. NOTE This Class B digital apparatus complies with Canadian ICES-003. — 4— General General Power SRC Turning ON the Power Press the [SRC] button. Press the [SRC] button for at least The FM modulator is turned OFF and • Be sure to turn down the volume whenever you radio or a cassette tape after stopping the disc play. • During the disc play is being conducted, you are not able receive ordinary Radio broadcasting because antenna output switched into compact disc player‘s side. Turning OFF the Power Switching Modes Press the [SRC] button. Source required Display Sirius "SIRIUS" CD/MD auto-changer "CHANGER"/"CHANGER-1"/ "CHANGER-2" Auxiliary input "AUX" Off For Auxiliary input one of the below optional accessories is necessary. - KCA-S210A - CA-C1AX - CD changer with an Auxiliary input function installed. — 5— English English Selecting Sirius . SRC u SRCH 4 d SEEK # 1-6 DISP Band display Preset station number Channel number SCAN indicator Press the [SRC] button. Select the "SIRIUS" display. • You need to subscribe to SIRIUS Satellite Radio. Consult SIRIUS if " CALL 888-539 SIRIUS TO SUBSCRIBE" appears. • It may take a little time to start receiving SIRIUS source. • If the signal receiving fails, "ACQUIRING SIGNAL" appears. Switching Seek Mode Sets the seeking mode. Press the [SEEK] button. Each time the button is pressed the Seek mode switches as shown below. Display Operation "SEEK 1" Normal manual seeking control. "SEEK 2" Search in order of the channels in the Preset memory. You cannot operate this unit during switching Channel or Category. Selecting the Preset Band Press the [ u] button. Each time the button is pressed the preset band switches between the SR1,SR2,SR3, and SR4. — 6— Channel Preset Channel Preset 1 Select the preset band Press the [ u] button. 2 Select the channel to put in Press the [ 4] or [ . ] button. 3 Put the channel in the memory Press the [#1] — [#6] button for at least The preset number display blinks 1 time. On each band, 1 channel can be put in the memory — [#6] button. Only the channel number is stored. Category information is stored. Preset Tuning Calling up the channels in the memory. 1 Select the preset band Press the [ u] button. 2 Call up the channel Press the [#1] — [#6] button. 2 Release it when Press the [SEEK] Channel Search You can switch from Up/Down of selected to Previous/Next of Category being received and vice versa. 1 Enter Channel Search mode Press the [SRCH] button. 2 Select the Category Press the [ u] or [ d] button. 3 Select the Channel Press the [ 4] or [ . ] button. Canceling Channel Search Press the [SRCH] button. You cannot operate this unit until all the Category information is acquired. Channel Scan Scanning for the channel you want to listen to. 1 Start Channel Scan Press the [SEEK] button for at least 1 second. "SCAN" indicator is ON. — 7— English English Direct Access (Function Switching Display Entering the channel 1 Enter Direct Access Tuning mode Press the [DIRECT] button 2 Enter the channel number Press the number buttons. 3 Do Channel Search Press the [ 4] or [ . ] button. Canceling Direct Access Tuning Press the [DIRECT] button on the remote. • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • You can set up to Channel number 223. • If there is no signal in the input Channel, "NO CHANNEL" appears. • If you cannot receive any signal in the input Channel due to a bad condition on radio wave or another problem, "ACQUIRING SIGNAL" appears. You can display various broadcasting stations Press the [DISP] button. Each time the button is pressed below. Information Display Channel Number Channel Name "CHANNEL" Song Title "SONG" Artist Name "ARTIST" Category Name "CATEGORY" Album Title "ALBUM" — 8 — 8—...