Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Since some Provinces do not allow the above limitation of liability, such limitation may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from Providence to Providence. Warranty Service is available at Brother Authorized Service Centers throughout Canada. For Technical Support or for the name and location of your nearest Authorized Service Center call 1-877-BROTHER. Internet support: support@brother.ca or browse Brother’s Web Site: Brother International Corporation (Canada) Ltd. 1 Rue Hotel de Ville Dollard-Des-Ormeaux, QC H9B 3H6 vi LIMITED WARRANTY (CANADA) Safety precautions To use the fax machine safely Save these instructions for later reference. WARNING There are high voltage electrodes inside the fax machine. Before you clean the fax machine or clear a paper jam, make sure you have unplugged the power cord from the power outlet. Do not handle the plug with wet hands. Doing this might cause an electrical shock. Be careful not to cut yourself on the sharp edges of the metal part shown in the illustration. Sharp Edge After you have just used the machine, some internal parts are extremely HOT! Please be careful. WARNING ¦ Use caution when installing or modifying telephone lines. Never touch telephone wires or terminals that are not insulated unless the telephone line has been disconnected at the wall jack. Never install telephone wiring during a lightning storm. Never install a telephone jack in a wet location. ¦ Install equipment with a power cord near an AC power outlet/socket that is easily accessible. ¦ To reduce the risk of shock or fire, use only a No. 26 AWG or larger telecommunication line cord. ¦ Do not use a telephone in the vicinity of gas leak to report leak. Caution ¦ Lightning and power surges can damage this product! We recommend that you use a quality surge protection device on the AC power line and on the telephone line, or unplug the lines during a lightning storm. ¦ Do not use this product near appliances that use water, in a wet basement or near a swimming pool. ¦ Avoid using a telephone other than a cordless type during an electrical storm. There may be a remote risk of electric shock from lightning. Choosing a location Place the fax machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put the fax machine near a telephone jack and a standard, grounded power outlet. Choose a location where the temperature remains between 50°F and 95°F (10°-35°C). Caution ¦ Avoid placing the fax machine in a high-traffic area. ¦ Do not place near heaters, air conditioners, water, chemicals, or refrigerators. ¦ Do not expose the fax machine to direct sunlight, excessive heat, moisture, or dust. ¦ Do not connect the fax machine to electrical outlets controlled by wall switches or automatic timers. ¦ Disruption of power can wipe out information in the fax machine’s memory. ¦ Do not connect the fax machine to electrical outlets on the same circuit as large appliances or other Equipment that might disrupt the power supply. ¦ Avoid interference sources, such as speakers or the base units of cordless phones. NO !NO !NO ! Quick Reference Guide Sending faxes Automatic transmission 1 Insert the original face down in the ADF (up to 10 pages). 2 Enter the fax number you want to call. 3 Press Fax Start. Receiving faxes Select Receive Mode 1 Press Receive Mode to select FAX ONLY, FAX/TEL, TAD:ANSWER MACH.or MANUAL. If you select FAX/TEL, make sure you set Ring Delay and F/T Ring Time. (See Setting the Ring Delay on page 5-2 and Setting the F/T Ring Time (FAX/TEL mode only) on page 5-3.) Storing numbers Storing One-Touch Dial numbers 1 Press Menu/Set, 6, 1. 2 Press a One-Touch key where you want to store a number. 3 Enter a number (up to 20 digits), and then press Menu/Set. 4 Enter a name (up to 15 characters) or leave it blank, and then press Menu/Set. 5 Press or to select the type of number and press Menu/Set. 6 Press Stop/Exit. Storing Speed-Dial numbers 1 Press Menu/Set, 6, 2. 2 Enter a two-digit Speed-Dial number (00-99). 3 Press Menu/Set. 4 Enter a number (up to 20 digits), and then press Menu/Set. 5 Enter a name (up to 15 characters) or leave it blank, and then press Menu/Set. 6 Press or to select the type of number and press Menu/Set. 7 Press Stop/Exit. Dialing operations One-Touch Dialing 1 Insert the original face down in the ADF. 2 Press the One-Touch key where you want to call. 3 Press Fax Start. Speed-Dialing 1 Insert the original face down in the ADF. 2 Press Search/Speed-Dial, then press # and the two-digit Speed-Dial number. 3 Press Fax Start. Search 1 Insert the original face down in the ADF. 2 Press Search/Speed Dial and use the dial pad to enter the first letter of the name you are looking for. 3 Press or to search the memory. 4 Press Fax Start, when the LCD shows the name you want to call. Making copies Making a single copy 1 Insert the original face down in the ADF. 2 Press Copy...