Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
The following types are available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX). ©When you operate this product, the power outlet should be near the product and easily accessible. Automatic dialing mode setting When the power cord is connected, the unit will start detecting the dialing mode. Display: CHECKING LINE Wait until one of the following messages is displayed. —If your line has touch tone service, the unit will display the following message. LINE IS TONE —If your line has rotary pulse dial service, the unit will display the following message. LINE IS PULSE Olf you connect the power cord before connecting the telephone line cord, the following messages will be shown alternately. CONNECT TEL LINE TEL LINE IS OPEN Connect the telephone line cord. o|f the power cord is disconnected or a power failure occurs, the unit will detect the dialing mode again when power is restored. oYou can change the dialing mode setting manually. See “Setting the dialing mode” on page 46. 10 For Assistance, Call 1 -800-435-7329 Location of control: Used to select a resolution (p. 17). Checks the amount of remaining film (p. 67). Dial keypad Used to print a quick reference (see below). Used to initiate/exit programming. Used for speed dialing (p. 28, 29). ABC DEF I CDGDGDj GHI JKL MNO Î ©©GD | PRS TUV WXY ( (DCDCDI — opEn | jDGD®i if. Display panel FIMPAFER SAW • MEMORY^ 0GH93 Used for one-touch dialing. Also used as character and command keys (p. 13, 27, 28). Used for multistation transmission (p. 35, 36). ■ ,mmQ : o O 11 o : o o 17 o o 18 w U o j LOWER Q- Used to stop an operation or programming. Used for voice muting (p. 15). Used for the speakerphone operation (p. 15). Redials the last number dialed. Also inserts a pause during dialing (p. 31). Used as a hookswitch (p. 31). Changes from pulse to tone during dialing (p. 31). Used to select a lower station (p. 27, 28). Used to turn on/off the auto receive mode (p. 19, 21). Adjusts ringer/handset/speaker volumes. Also used as a cursor key or a selection key (p. 12, 15, 16). Used to initiate fax transmission/reception and copying. Also used to store a parameter during programming. IH@lp function Qyick Start Installation Initial preparation Quick Start Initial ptepansHon Before using your unit, program the correct date and time, your logo and your facsimile telephone number. This information will be printed on the top of each page transmitted from your unit. Your logo Your facsimile telephone number Date and time FROM ; Panasonic Fax system PHONE NO ; 1234567 Fax Correspondence Feb. 26 1997 04:02PM PI Settting te dlate and tm® 1 Press (MENU). Display: SYSTEM SET UP Press («), then [ö] (T|. SET DATE & TIME Press (START/COPY/SET). 7 Press (START/COPY/SET). (5) Press (MENU). (0) Enter the correct month/day/year by selecting each 2 digits. Example: Aug. 10 1997 Press ®0[Qo] 00- M: 08/D: 10/Y: 97 olf you make a mistake, press (( VOLUME)) to move the cursor to the incorrect number, then make corrections. Press (START/COPY/SET). Enter the correct hour/minute by selecting each 2 digits. Press (*) to select AM or PM. Example: 3:00PM Press 0E [ojo], then press [*] until PM is displayed. TIME: 03 : 00PM olf you make a mistake, press ([VOLUME]) to move the cursor to the incorrect number, then make corrections. Dial keypad [MEW] CD CD CD; (DCDCDj CD CD CD; GDGDCDÎ __,11 — - * 1 I o a c 3 cmp ((VOLUME)) ( START/COPY/SET) Note: olf you press (STOP) while programming, the display will return to the previous one. oThe accuracy of the clock will be approximately ±60 seconds a month. 12 For Assistance, Call 1-800-435-7329 ksîüiog уоуг logo The logo can be a company, division or personal name in an abbreviated form. 1 Press [MENU). Display: SYSTEM SET UP Dial keypad [MENU] Press [5], then QT] |T). YOUR LOGO Press START/COPY/SET . LOGO= Enter your logo up to 30 characters using the dial keypad and direct call station keys. For example, when entering “Bill” as your logo: 1. Press (T) twice. LOGO=B 2. Press (T) six times. LOGO=Bi 3. Press (T) six times. LOGO=Bil 4. Press О ([VOLUME)) to move the cursor and press [5] six times. LOGO=Bil1 Note: Olf you use the same number key continuously to enter the next character, press f>1 ([VOLUME)) to move the cursor. Press [ START/COPY/SET}. Press [MENU). To correct a mistake while programming Use ([VOLUME)) to move the cursor to the incorrect character, then make the correction, or Press [ STOP) to delete the character to the left of the cursor. CD CD CD! CD CD CD; CD® CD; ® ® GDÍ С Direct call station keys C=> CZ) (=1 <=> (STOP) Z2 SXS ((VOLUME)) (START/COPY/SET) Character table Keys Dial keys Direct call station keys CD CD CD CD CD CD CD CD CD CD a © а @ Characters 1 А В С a b с 2 D E F d e f 3 G H I g h i 4 J К L ...