Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
To select a menu item not shown on the current page, scroll up or down by pressing the navigator key, {e} or {v}, respectively. 9. Programmable Features 9.5.1 Programmable functions {j/OK} {C} {ih} {>}{e}{v} Helpful hints: L To exit programming, press {ih} at any time. 9.5.2 Alarm Setting alarm An alarm will sound for 3 minutes at the set time once or daily. Set the date and time beforehand (page 23). 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Time Settings”, then press {>}. 4. Select “Alarm”, then press {>} 2 times. 5. Select an alarm mode, then press {>}. – “Once”: The alarm will sound once at the set time. Enter the desired day and month by selecting 2 digits for each. – “Daily”: An alarm will sound daily at the set time. – “Off” (default): Turns the alarm OFF. Press {>} again, then press {ih} to finish. 6. Enter the desired hour and minute by selecting 2 digits for each. L You can select “AM”, “PM” or 24-hour time entry by pressing {*} repeatedly. 7. Press {j/OK}. 8. Select the ring tone that will sound at the set time, then press {>}. 9. Select “Save”, then press {>}. 10.Press {ih}. Note: L To stop the alarm, press any dial key. L When the handset is in talk or intercom mode, the alarm will not sound until the call has ended. L Alarm volume depends on handset ringer volume (page 22). L The alarm will sound at the set time even when the ringer is turned OFF. L If you select “Once”, the setting will be changed to “Off” after the alarm sounds. 9.5.3 Ringer options Changing ring tones You can choose the ring tone used by the handset. “Ext. Ringtone”: Selects the ring tone for outside calls. “Int. Ringtone”: Selects the ring tone for intercom calls. 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Ringer Setup”, then press {>}. 4. Select the desired item, then press {>}. 5. Select the desired ring tone, then press {>}. 6. Press {ih}. Note: L If you select one of the melody ring tones, the ring tone will continue to sound for several seconds if the caller hangs up before you answer. You may hear a dial tone or no one on the line when you answer a call. L The preset melodies in this product are used with permission of © 2004 M-ZoNE Co., Ltd. L To set the base unit ring tone, see feature #17 on page 59. 9.5.4 Night mode Night mode allows you to select a block of time during which the handset will not ring for outside calls. This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Using the handset phonebook’s category feature (page 30), you can also select categories of callers whose calls will override night mode and ring the handset (Caller ID users only). Set the date and time beforehand (page 23). Note: L The base unit will ring regardless of this setting. Setting night mode ON/OFF 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Ringer Setup”, then press {>}. 4. Select “Night Mode”, then press {>}. 5. Select “On/Off”, then press {>}. 9. Programmable Features 6. Select “On” or “Off” (default), then press {>}. 7. Press {ih}. Note: L When the night mode is turned ON, “[N]” is displayed. L Set the receiving mode to TEL mode. Setting the start and end time for night mode 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Ringer Setup”, then press {>}. 4. Select “Night Mode”, then press {>}. 5. Select “Start/End”, then press {>}. 6. Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each. L If you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time. 7. Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each. L If you use 12-hour time entry, select “AM” or “PM” by pressing {*} repeatedly before entering the time. 8. Press {j/OK}. 9. Press {ih}. Setting the ring delay for night mode This setting allows the handset to ring during night mode if the caller waits long enough. After the selected delay time has passed, the handset will ring. If you select “No Ringing”, the handset will not ring during night mode. 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Ringer Setup”, then press {>}. 4. Select “Night Mode”, then press {>}. 5. Select “Ring Delay”, then press {>}. 6. Select “30 sec.” or “60 sec.”, then press {>}. 7. Press {ih}. Note: L Delayed ring will not sound if this feature is set either to “90 sec.” or “120 sec.”. This is because the base unit detects an incoming call prior to handset. Selecting categories to bypass night mode 1. Press {j/OK}. 2. Select “Handset Setup”, then press {>}. 3. Select “Ringer Setup”, then press {>}. 4. Select “Night Mode”, then press {>}. 5. Select “Select Category”, then press {>}. 6. Press the desired category numbers, then press {j/OK}. L The selected category number will flash. L To cancel a selected category number, press the number again. The number will stop flashing. 7. Press {ih}. 9.5.5 Display se...