Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Ives, модель 671

Производитель: Ives
Размер: 29.19 kb
Название файла: 967a69bc-d373-41ec-ae74-2cd3c8f0fc3a.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


DOORS TOOLS REQUIRED: Drill. 3/32" bil. Phillips screwdriver, chisel, hummer, awl. pencil. 1-1/4" spade bil or 1-1/4" router. New Installation: 1. Position lop of hinge approximately 5" from top of door and bottom hinge approximately 10" from floor. Position the third hinge equally between the top and hottoni hinges. 2. The hinge barrels should extend out from door enough to clear door casing. See illustration. 3. Trace hinge outline and mortise door to fit thickness of hinge leaf. The inside edge of hinge should be approximately 1/4" from door edge. See illustration. 4. Mark and drill pilot holes with 3/32" drill bit. 5. Fasten hinges to door and jamb with screws provided. Make sure the end with the hole is pointed toward the floor. 1. Remove hinge pins from all hinges. 2. Remove door from frame. 3. Remove existing hinges. 4. Install new hinges. Note: Tapping a nail through the hole in hinge tip will remove hinge pin. H.B. Ives Solid Brass products have a clear, protective lacquer coating which helps prevent discoloration. Polish with a soft cloth. Do not use abrasive waxes or cleaners. INSTALLATION INSTRUCTIONS / Replacement Installation: MAINTENANCE INSTRUCTIONS TOP VIEW y«“ FROM LOOK FOR OUR DECORATIVE TIP KITS C671B3 4" RADIUS HINGE © 1993, H.B. IVES, .1 HARROW COMPANY. Wallingford, CT 06492 MADE EXCLUSIVELY I:OR H.B. IVES IN PORTUGAL 044074204308...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории