Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Turn the key 1.4 turn clockwise to unlock the safe door, use the hand indent to pull the door open, then remove the contents of the safe. 5. Remove the battery cover on the back of the safe door, then install the four "AA" batteries provided to activate the digital keypad. 6. Close the safe door, rotate the key 1.4 turn counterclockwise, remove it from the door, then re-attach the nameplate. Personal Code Both your personal code and emergency code can open the safe door, but only your personal code can lock it. To lock the safe door using your personal code: 1. Close the safe door. 2. Use the digital keypad to enter a four-digit personal code of your choice, then press the "#" key to activate the locking mechanism (see Figure 2). The LED window will display the word "CLOSEd ", then your personal code will be displayed for a few seconds. Note: Your personal code is re-set each time you enter it. You can use the same code repeatedly or enter a new one each time you lock the safe. Keypad Hand indent LED Display Figure 2. safe digital keypad (Model T21543 shown). 3. Record your four-digit personal code below. Note: Be sure to store these instructions in a secure location. Personal Code: To open the safe door using your personal code: 1. Use the digital keypad to enter the four-digit personal code that you used to lock the door. When the last digit is entered, the locking mechanism will release and the LED window will display the word "OPENEd ". 2. Use the hand indent at the bottom of the keypad to open the door. Emergency Code The emergency code can only be used to open the door. Use this code in the event that you have forgotten or misplaced your personal code, or the safe keys are not readily available. To use the emergency code to open the safe door: 1. Use the digital keypad to enter the six- digit emergency code. When the last digit is entered, the locking mechanism will release the door and the LED window will display the word "OPENEd ". Note: The default factory-programmed emergency code is "011223". You can keep this code as it is or change it as instructed in the next section. -2 T21543/T21544/T21545 Electronic Keypad safe To change the emergency code: 1. With the safe door unlocked, push the "*" key twice. The LED window will display the word "PROG ". 2. When the LED window clears, enter the current emergency code. —if the current emergency code is entered successfully, the LED window will display the word "NEW ". Continue to Step 3. —if the code is not entered correctly, the word "Error " will be displayed. Restart the procedure with Step 1. NOTICE If you change the emergency code from the factory default and forget or misplace it, you will not be able to reset or change it. Always record the new emergency code below, then store these instructions in a secure location. 3. After the LED window clears, enter the new six-digit emergency code. The LED window will display the word "AGAIN". 4. When the LED window clears again, re-enter the new c...
Эта инструкция также подходит к моделям:Двери и окна - T21543 (195.19 kb)
Двери и окна - T21546 (195.19 kb)