Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Tape template to outside of door. 2. Mark centers with awl (or nail) and drill holes (A) with 1/16” drill bit 3. Drill hole (B) for viewer completely through door from outside with 1/2" drill bit. 4. Mount door knocker and secure. 5. Insert viewer (C) through knocker from outside. Insert receiver tube (D) from inside and tighten. See illustration. BOTTOM NOTE: Check product against template before installing. MAINTENANCE INSTRUCTIONS H.B. IVES solid brass products have a clear, protective lacquer coating which helps prevent discoloration. Do not use abrasive waxes or cleaners. ASK FOR OTHER FINE DECORATIVE HARDWARE BY H.B. IVES DOOR KNOCKERS MAIL SLOTS DOOR VIEWERS HOUSE NUMBERS...
Эта инструкция также подходит к моделям:Двери и окна - 31221 (40.05 kb)