Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Granted Buzzer o/p when access granted Acc. Denied Buzzer o/p when access denied 1 Feature present on ACT1000 only2 Feature present on ACT2000 only* On ACT2000 you will first be required to select a door. KPD Release1 Exit PIN’s Second Door1 User One-To-One Display PIN Length Fire Doors User Tracking2 Define Perimeter doors Define Antipassback doors Set time for auto-reset (auto-logout) User Limits Set user limits A & B Outputs2 Only one door may be open at any time. Confirmation tones disabled Door stays open while Push Button closed Door relay is normally energised Silent Exit PIR Failsafe Alarms PIN’s alone are used to gain access Users 1-1/2000 may use random coded cards Use external ACT20 keypad . .... Key is exit button. Exit PIN’s may be used in PIN only mode Second (Auxiliary) door enabled on ACT1000 Prevent access if the user limit is reached Card numbers may be assigned to Users 11000/ 2000 Users may have multiple cards Keypad backlight enabled Keypad beep enabled Display current status of doors on LCD Display events on LCD as they occur Use handshake line when printing Controller bleeps for technical fault Define door 1 output special functions Define door 2 output special functions Door release button enabled Relay de-energized as door opens Buzzer sounds as door opens • !!!! on external keypad fires AUX/buzzer Page 12 of 32 ACT1000/2000 Operating Instructions Software Version 3.23-00 Door Settings* Timers Relay Time Time for which relay is active (contd.) OP2 Time Time for which OP2 is active OP3 Time Time for which OP3 is active Max time which door can be open AUX Time Time for which AUX output is active Reporting Buzzer o/p active if door left ajar Door Forced Door Forced events report in log Door Open events report in log Door Closed Door Closed events report in log Push Button Push Button events report in log Read Error Log and report reader errors Timed Actions Unlock Door Specify times when door is unlocked Lock Door Specify times when door is locked Specify times when PIN is required Specify times when any card gains access Activate OP2 Specify times when OP2 is active Activate OP3 Specify times when OP3 is active Activate AUX Specify times when AUX is active Specify times for PIN Only operation PIN or Card2 Specify times for PIN or Card operation Assign Name Assign a name to a door Set Address Set the network address of this door Direct Conn. Specifies that this controller is connected directly to a PC Sets the network communications speed to 19200 baud Slave Mode2 Specifies that this controller is a slave under ACT5000pc Disables the reporting of offline log events in slave mode. Print All Enables real-time logging on attached serial printer Remote Doors2 Enable/Disable remote doors connected via DS100 modules Set Password Set a password for remote communications Site Code 1 Enter the primary site code for the system Site Code 2 Enter a secondary site code for the system Card Format Enter a custom card format for the system Version Displays the current software version Reader test Reads a card and displays the received information. Last Reset Displays a code indicating the reason for the last reset. Change the PIN used to access the Installer menu Restore the system to its factory default settings. 1 Feature present on ACT1000 only 2 Feature present on ACT2000 only * On ACT2000 you will first be required to select a door. Exit from menu is automatic if no keys are pressed for a period of time. Ajar Time Door Ajar Door Open PIN Required Any Card PIN Only Communications Card Setup Diagnostics Change PIN Factory Defaults High Speed No Hist. Log Page 13 of 32 ACT1000/2000 Operating Instructions Software Version 3.23-00 System Settings The System Settings menu allows the installer to access a number of different configuration menus controlling different aspects of the setup of the controller. Pressing the . .... key toggles the setting of a displayed option. Operation This menu allows the installer to select or de-select a number of options relating to the default operation of the controller. • The PIN Only option allows reader-less operation using PIN codes that are directly entered on the keyboard (or on an external keypad). Up to 2000 codes may be used. • The Learn option allows the first 2000 users to use randomly coded cards. Almost any card with valid ISO track 2 data may be used (for example bankcards) as well as some types of wiegand card. • The Ext. Keypad option allows an external ACT20 keypad to be used for PIN entry on an ACT1000 controller. By default, the ACT1000’s own keypad is used. • The KPD Release option allows the . .... key on an ACT1000 to function as an exit switch. • The Exit PIN’s option is applicable for ACT1000 PIN-only systems. When set, it requires PIN codes to be entered before the user is allowed to exit. • The Second Door option allows an auxiliary door to be controlled on an ACT1000 unit. • The User Limiting option will prevent access to tracked users when t...
Эта инструкция также подходит к моделям:Двери и окна - ACT ACT1000 (822.46 kb)