Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
SUBTITLE (Default : OFF) • Sets the subtitle language. DISC MENU (Default : ENGLISH) • Sets the language for DVD Menu. OSD (Default : ENGLISH) QUICK • Sets the language for the On-Screen display. 5 Press the Cursor buttons (K or L) to select a setting, then press the ENTER button. • If OTHER is selected in the DIALOG, SUBTITLE or DISC MENU, press four-digit number to enter the code for the desired language (refer to the language code list on page 29). • Only the languages supported by the disc can be selected. 6 Press the SETUP button to exit and activate the new settings. NOTE: • Language Setting for DIALOG and SUBTITLE may not be available with some discs. Then use the AUDIO and SUBTITLE buttons. Details are on page 23. Display Setting You can change certain aspects of the DVD display screens, still mode setting, Progressive and HDMI settings. Press the SETUP button in stop mode. Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button. 2 1 • The custom mode will appear. 3 Press the Cursor buttons (s or B) to select DISPLAY, then press the ENTER button to confirm. 4 Press the Cursor buttons (K or L) to select an item, then press the ENTER button. DISPLAY TV ASPECT 4:3 LETTER BOX STILL MODE AUTO PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT YCbCr HDMI PICTURE NORMAL TV ASPECT (Default : 4:3 LETTER BOX) QUICK • Press the Cursor buttons (K or L) for an item selection, then press the ENTER button. • Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen. • Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. DISPLAY TV ASPECT 4:3 LETTER BOX 4:3 PAN & SCAN 16:9 WIDE 4:3 SQUEEZE • Select 16:9 WIDE if a wide-screen TV is connected to the DVD player. • Select 4:3 SQUEEZE when the TV screen is too large horizontally at 16:9 WIDE setting and when it is impossible to adjust the screen size using the TV’s controls. STILL MODE (Default : AUTO) • Press the Cursor buttons (K or L) for an item selection (AUTO, FIELD, or FRAME), then press the ENTER button. • This function allows you to adjust picture resolution and quality in still mode. DISPLAY FIELD FRAME STILL MODE • An individual picture on TV screen is called as “frame”, which consists of two separate images called as “field”. Some pictures may be blurred at the AUTO setting in still mode due to their data characteristics. • AUTO: Automatically selects the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. • FIELD: Select FIELD when the pictures are still unstable even if AUTO is selected. FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data. • FRAME: Select FRAME to display relatively motionless pictures in higher resolution. FRAME improves the picture quality, although it may unstabilize the pictures due to simultaneous output of two field data. PROGRESSIVE (Default: OFF) QUICK • Press the Cursor buttons (K or L) to set PROGRESSIVE to ON or OFF, then press the ENTER button. • The setting will be effective when you exit the setup screen by pressing SETUP. DISPLAY TV ASPECT 4:3 LETTER BOX STILL MODE AUTO PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT RGB HDMI PICTURE NORMAL • When PROGRESSIVE is ON, P.SCAN appears on the DVD player’s display after you exit the setup screen. • Refer to page 11 for more details. • In the HDMI output mode, even when PROGRESSIVE is set to ON, signals are output always as Interlace. PROG.MODE (Default: AUTO1) • Press the Cursor buttons (K or L) to select a mode for the progressive scan output, then press the ENTER button. • AUTO1: mode suitable for images on the film material. DISPLAY PROG.MODE AUTO2 VIDEO1 VIDEO2 VIDEO3 • AUTO2: mode for images on the material of 30-frame film. • VIDEO1: mode for normal video material. • VIDEO2: mode for video material with less movements. • VIDEO3: mode for video material with many movements. HDMI SELECT (Default: YCbCr) • Select an HDMI output mode between YCbCr and RGB. • When the connected equipment is not compatible with YCbCr, HDMI signal is output as RGB regardless of the setting. DISPLAY TV ASPECT 4:3 LETTER BOX STILL MODE AUTO PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT YCbCr HDMI PICTURE NORMAL HDMI PICTURE (Default: NORMAL) • Select a HDMI picture mode between NORMAL and ENHANCED. • Select ENHANCED if the black- white contrast is not clear. • This setting is effective only for HDMI RGB output. English 5 Press the SETUP button to exit and activate the new settings. DISPLAY TV ASPECT 4:3 LETTER BOX STILL MODE AUTO PROGRESSIVE OFF PROG.MODE AUTO1 HDMI SELECT YCbCr HDMI PICTURE NORMAL –25– EN DVD SETUP DVD SETUP You can change some Audio settings. It only affects during the playback of DVD discs. 2 1 Press the SETUP button in stop mode. Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button. • The custom mode will appear. Press the Cursor buttons (s or B) to select AUDIO, then the ENTER button to confirm. Press t...