Оценок - 1, средний балл: 3
(
)
)
|
Фото и характеристики Denon DVD-1710 |
Фрагмент инструкции
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output connector using a commercially available S-Video connection cord. HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not included. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF Modulator for more details. If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above. NOTE • The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal through an RF Modulator. –14– EN EnglishPLAYING A DISC PLAYING A DISC Still / Pause Basic Playback DVD-V CD MP3 JPEG WMA DVD-V CD MP3 JPEG WMA Getting started •Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. • Make sure the TV and audio receiver (commercially available) are set to the correct channel. Press the POWER ON button. 4 3 2 1 • “P-ON” will appear briefly on the display panel. Press the OPEN/CLOSE button to open disc loading tray. Place the disc in the tray, with the label facing up. Press the PLAY button. • The tray will close automatically, then playback will start from the first chapter or track of the disc. If the playback does not start automatically, press the PLAY button. • When you playback the DVD with a title menu, it may appear on the screen. In this case, refer to “Title menu”. 5 Press the STOP button to stop playback. NOTES: •A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. •With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles. • During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. • The operation may vary when you playback DVDs with disc menu. Refer to the manual accompanying the disc for details. General Features DVD-V DVD may contain menus to navigate the disc and access special features. Press the appropriate numerical key or use the Cursor buttons ( K / L / s / B) to highlight your selection in the DVD main menu and press the ENTER button to confirm. NOTE: • Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. Brightness of the Front Panel Display 1 Press the DIMMER button on the front panel to select the desired brightness of the front panel display. (Bright, Dimmer, or OFF) • “Bright” has been selected as the factory default. NOTES: • The brightness of the front panel display can be adjusted from the SETUP menu. Details are on page 23. • When you turn on the power next time, the brightness of the front panel display will be the settings in SETUP menu. 1 During playback, press the STILL/PAUSE button. • Playback will pause and sound will be muted. F 2 To continue playback, press the PLAY button. NOTE: • Set “STILL MODE” to “FIELD” on the display menu if pictures in the pause mode are blurred. (Refer to page 23.) Disc Menus DVD-V 4 3 2 1 Press the MENU button. • The DVD main menu will appear. If the feature is not available, symbol may appear on the TV screen. If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. Press the Cursor buttons ( K / L / s / B ) to select an item, and the ENTER button to confirm selection. Title Menu DVD-V 3 2 1 Press the TOP MENU button. • The title menu will appear. If the feature is not available, symbol may appear on the TV screen. Press the Cursor buttons ( K / L / s / B ) to select an item, and the ENTER button to confirm selection. • Playback will begin at the selected Title. CALLING UP A MENU SCREEN DURING PLAYBACK DVD-V • Press the MENU button to call up the DVD main menu. • Press the TOP MENU button to call up the title menu. NOTE: • Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details. –15– EN PLAYING A DISC Step by Step Playback DVD-V 1 During playback, press the STILL/PAUSE button. • Playback will pause and sound will be muted. The dis...