Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
3. dts To select whether DTS bitstream is output from the optical/coaxial digital audio output connector or no digital audio is output during playback of the DVD recorded in dts. Digital Audio Output 1 LPCM 96k 48k No 2 Dolby Digital Bitstream 3 dts Off 0 Exit Remote control unit SELECT 4 Use the • and . cursor buttons to select the desired setting, then press the SELECT button. q When “1 LPCM 96k / 48k” is selected 1. No (Factory default) Digital audio of 48 kHz/16 bit is output during playback of the DVD recorded in Linear PCM of 48 kHz. No digital audio is output during playback of the DVD recorded in Linear PCM of 96 kHz. However, audio will be output using the original audio recording system in case of the DVD which has not been copyright-protected. 2. Yes During playback of the DVD recorded in Linear PCM of 48 kHz or 96 kHz, digital audio converted to 48 kHz/16 bit is output. (Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.) w When “2 Dolby Digital” is selected 1. Bitstream (Factory default) (NOTE 1) Dolby Digital (AC-3) bitstream (1ch – 5.1ch) is output during playback of the DVD recorded in the Dolby Digital (AC-3). Select this setting when the player is connected to the Dolby Digital (AC-3) decoder. 2. PCM Digital audio converted to PCM (2ch) of 48 kHz/16 bit is output during playback of the DVD recorded in the Dolby Digital (AC-3). Remote control unit SELECT Remote control unit ENGLISH 4 e When “3 DTS” is selected 1. Off (Factory default) No digital audio is output during playback of the DVD recorded in DTS. 2. Bitstream (NOTE 1) DTS bitstream is output during playback of the DVD recorded in DTS. Select this setting when the player is connected to the DTS decoder. 5 The settings are completed, and the screen in step 3 reappears. Digital Audio Output 1 LPCM 96k 48k No 2 Dolby Digital Bitstream 3 dts Off 0 Exit * To return to the previous menu screen: Press the RETURN button. * To exit the default settings: Press the SET UP button or number button “0” at the default setting screen in step 1 on page 44. • Recommended “Digital Audio Output” settings The optimum digital output setting depends on the type of component connected to the digital audio output connector. Digital audio output connector “7 Digital Audio Output” setting 1 LPCM (96k / 48k) 2 Dolby Digital 3 DTS When nothing is connected to the digital audio output connector 1 No (factory default) 1 Bitstream (factory default) 1 Off (factory default) When an amplifier equipped with a digital input connector and with no built-in Dolby Digital (AC-3) decoder is connected to the digital audio output connector (see page 11) 2 Yes (NOTE 1) 2 PCM (NOTE 2) 1 Off (factory default) When a Dolby Digital (AC-3) decoder is connected to the digital audio output connector (see page 12) 2 Yes (NOTE 1) 1 Bitstream (factory default) 1 Off (factory default) When a Dolby Digital (AC-3) DTS decoder is connected to the digital audio output connector 2 Yes (NOTE 1) 1 Bitstream (factory default) 2 Bitstream NOTES: 1. When connecting an amplifier (with an optical/coaxial digital input connector) which does not contain the Dolby Digital (AC-3) or dts decoder, be sure to select “PCM” at the “2 Dolby Digital” and “Off” at the “3 dts”. If “Bitstream” is selected, any attempt to play DVD may cause such a high level of noise that it may be harmful to your ears and damage your speakers. 2. Audio output from the player‘s audio output connectors is converted to 48 kHz as well as audio from the digital audio output connector. To enjoy high quality sound at 96 kHz, connect the amplifier or decoder directly to the audio output connectors, not to the digital audio output connector. (Select “No” at the “1 LPCM 96k / 48k”.) ENGLISH When “9 Other Settings” is Selected 1 See page 44. 2 3 Use the • and . cursor buttons to select “9 Other Settings”, then press the SELECT button. 1. Still Mode Use this to reduce fluttering of the picture when playing still pictures. 2. Audio during search Use this to set whether or not to play the sound during the search operation in speed 1. 3. TV mode (4:3) Use this to set the TV screen display when playing wide DVDs on conventional size TVs. 4. D.Range Compression Use this to set the range of sound output when playing discs. 5. Still Picture Display To select whether the picture type (I/P/B) is displayed on the TV screen in the still picture mode or not. 6. Black Level Control To select the black level of the picture, “Lighter” or “Darker”. Other Settings 1 Still Mode Automatic 0 Exit 2 Audio durig Search On 3 TV Mode (4:3) Pan&Scan 4 D.Range Compression Off 5 Still picture Display Off 6 Black Level Control Lighter Remote control unit SELECT 4 Use the • and . cursor buttons to select the desired setting, then press the SELECT button. q When “1 Still Mode” is selected 1. Automatic (Factory default) Normally set this. The frame still or field still mode is selected automatically. 2. Field Select this if the pi...