Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
On the front display panel Press rt to select “AUTO” and press OK or e. On the on-screen display Press rt to move the highlight bar (pointer) to “AUTO SET” and press OK or e. While Auto Set Up is in progress, do NOT press any button on the unit or remote control until the front display panel shows either the display as illustrated in step E or “– –:– –” as illustrated on page 13. . If you are using the on-screen display, the AUTO SET screen will appear. As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right. Beginning End ATTENTION Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit performs only Auto Clock Set when the unit is turned on. If you have moved to a different area, perform each setting as required. . Video channel setting (for RF connection users) . pg. 73 . Tuner setting . pg. 68 . Clock setting . pg. 74 If a new station starts broadcasting in your area, perform tuner setting (. pg. 68) and, if necessary, video channel setting (. pg. 73). NOTES: . In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set. . If there is a power cut, or if you press 1or SET UP MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A. . Auto Clock Set may not function properly depending on the reception condition. . If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. (. pg. 70, “INFORMATION”) After “Auto Set Up” is completed, perform “Monitor Set (DVD deck)” on page 14. . When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable (. pg. 9) and the TV is turned on, the unit automatically performs the Preset Download (. pg. 12) even if you select “AUTO” or “AUTO SET” for Auto Set Up function. E E Confirm/Set video channel. With RF Connection The video channel that is shown on the display panel is your video channel. Press OK. . If you have selected MAGYARORSZAG, CESKA REPUBLIKA, POLSKA or OTHER EASTERN EUROPE in step B on page 10, “2” appears instead of “1”. . To view picture signals from the unit, set your TV to the video channel. With AV Connection Press PR – until the display panel shows “1 CH – –” (or “2 CH – –”). Now the video channel is set to off. Then press OK. . To view picture signals from the unit, set your TV to its AV mode. Page 11 August 29, 2003 8:03 am Filename [XV3EX_06Index.fm] Masterpage:Left+ XV3EX_01.book Page 12 Friday, August 22, 2003 12:21 PM 12 EN INITIAL SETTINGS (cont.) Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set If you have connected the unit to your TV via the AV connection (. pg. 9), the unit will automatically perform Preset Download instead of the Auto Set Up in step D on page 11. After downloading, the unit sets the clock and Guide Program numbers automatically. ATTENTION You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable. * Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system. . Slide the TV/VCR/DVD switch to the right. . Perform steps Ato C of “Auto Set Up” on page 10 before continuing. NOTES: . For details, refer to the instruction manual of your TV. . In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set. . If there is a power cut, or if you press 1or SET UP MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the unit power once and try again from the beginning. . Auto Clock Set may not function properly depending on the reception condition. . On this unit, the characters available for station names (ID) are A–Z, 0–9, –, f, + and I (space). Some names of downloaded stations may differ from those of your TV. (. pg. 71) A A Perform Preset Download. Press OK. The AUTO SET/T-V LINK display appears on the front display panel and/or on the TV screen. On the front display panel Press rtto select “CH – –” and press OK or e. On the on-screen display Press rtto move the highlight bar (pointer) to “T-V LINK” and press OK or e. Preset positions on the front display panel increase from “CH 1”; do NOT press any button on the unit or remote control until the front display panel shows clock time, “(CH) 1” or “– –:– –” as illustrated on page 13. . If you are using the on-screen display, the T-V LINK ...