Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Press selection keys to set the desired start time, then press ENTER. BBC1 [MISC. ] XP BBC1 23:00 22:30 HDD 2PROGRAMME > CALENDAR PR. (2 3 CONFIRM 14/01/04 WED 22:30 - 23:00 RECORD TO STOP START TV PROG ENTER SELECT EXIT R GRAMM PRESS [PROGRAMME] TO EXIT SELECT W TH @ THEN PRESS [ENTER] . Each press of FGincreases/decreases the start time in 1minute intervals. . To increase/decrease the start time in 30-minute intervals, press and hold FG. 7 Press selection keys to select ASTOPB, then press ENTER. Press selection keys to set the desired stop time, then press ENTER. . Each press of FGincreases/decreases the stop time in 1minute intervals. . To increase/decrease the stop time in 30-minute intervals, press and hold FG. 8 Press selection keys to select ATV PROGB, then press ENTER. Press selection keys to select the desired channel. 9 Press selection keys to select ACONFIRMB, then press ENTER. 10 Set the other recording options as required. . Refer to step 8 in ASHOWVIEW Timer ProgrammingB (Apg. 44). 11 Press selection keys to select AOKB, then press ENTER to access the Programme Confirmation screen. 12 Press selection keys to select AEXITB, then press ENTER to complete timer programming. BBC11:0028:002PROGRAMME > CALENDAR PR 3 3 14/01/04 WED 22:30 - 23:00 ENTER SELECT EXIT OGRAMM PRESS PROGRAMME TO EXIT VPS/PDC OFF SELECT W TH @ INPUT TITLE GARDENING THEN PRESS [ENTER] OK CATEGORY WEEKLY/DAILY EDUCATION REC MODE MON-FRI (FOR A WEEK) FR360 GARDENING [EDUCATION] FR360 . To programme another timer, press selection keys to select ACONTINUEB, then press ENTER. . If APROGRAMME OVERLAPPEDB appears on the TV screen, delete or modify the programmes. NOTES: . When two successive programmes are recorded on a DVD-RW disc with Manual Timer Programming function, the beginning of the second one may be left off the recording. . If the copy limited programme is received during timer recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed. Satellite Receiver Users To timer record a satellite broadcast using Manual Timer Programming: A Perform AManual Timer ProgrammingB on this page. In step 8, set ATV PROGB to AL-2B. B Set the satellite receiver to the appropriate channel before the selected programme begins. C Leave the satellite receiver’s power on. Relief Recording When a programme that is set for the DVD deck cannot be recorded properly, the programme is recorded to the HDD deck instead in the recording mode as set. . If the remaining capacity of the hard disk is not sufficient, the programme is recorded to the DVD deck until the remaining capacity of the DVD disc lasts. . If AJUSTB is selected for the recording mode, the current recording mode for the DVD deck is applied. PROGRAMME ENTER Selection Keys FGDE CABLE/SATDVDTV TIMER RECORDING ON HDD/DVD DECK EN 47 Check Programmes To check the whole list of programmes 1 Press PROGRAMME to access the programme top screen. 2 Press selection keys to select APROGRAMME LISTB, then press ENTER. . The details of a selected programme appear on the top of the screen. . The daily programme of a title is listed as one programme. To check the list of programmes by date 1 Press PROGRAMME to access the programme top screen. 2 Press selection keys to select ACALENDAR LISTB, then press ENTER. 3 Press selection keys to select the desired date, then press ENTER. Cancel And Change Programmes . Repeat steps in ACheck ProgrammesB to select a programme before proceeding. To cancel the programme 1 Press selection keys to select ACANCELB, then press ENTER. To modify the programme settings 1 Press selection keys to select AMODIFYB, then press ENTER. 2 Change the settings of the desired recording options as required. . Refer to steps 4 – 12 in AManual Timer ProgrammingB (Apg. 46). To skip the weekly/daily programmes to the next week/day It is easy to temporarily cancel weekly/daily programmes of a week/day. 1 Press selection keys to select APROGRAMME SKIPB, then press ENTER. 2 Press selection keys to select ASKIPB, then press ENTER. To save the titles of weekly/daily programmes (HDD Deck Only) Use this function to avoid overwriting titles of weekly/daily programmes of a previous week/day. 1 Press selection keys to select ATITLE SAVEB, then press ENTER. 2 Press selection keys to select ASAVEB, then press ENTER. NOTE: This function is available only when the remaining capacity of the hard disk is sufficient. TIMER RECORDING ON HDD/DVD DECK 48 EN Automatic Satellite Programme Recording (HDD Deck Only) This function allows you to automatically record a satellite programme which is timer programmed on your external satellite receiver. Connect a satellite receiver to the unit’s [L-2 IN/DECODER] connector and programme the timer on the satellite receiver. The unit starts or stops recording by the signals input from the satellite receiver. After recording, the unit’s power shuts off automatically. ATTENTION: . Be sure not to ...