Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
4:3 Only for playing back and recording Normal format recordings (4:3). 16:9: Only for playing back and recording Wide-Screen format recordings (16:9). REC i Pr-12 ACMSPSETR12 ON OFF OSDf16:9 4:3 16:9 4:3 ABC OSD NICSTB THROUGH AUTO 4:3 16:9 3 33 Press MENU to remove the menus from the TV screen. To enjoy Wide-Screen playback you must connect your VCR to the TV using a SCART cable. To set the decoder We have already described, how to connect a decoder for pay-TV station as CANAL+ or PREMIERE on page 11. For the recording of an encoded station you do not have to control anything. You just select the station and wait shortly until the decoding will start. 1 11 Press MENU. The main menu will appear on the TV screen. Press F or G to select the DECODER. Press OK. 2 22 Press D or E to select. ON: When the decoder is connected to the AV2 socket. OFF: When another VCR is connected to the AV2 socket. Press MENU to return to a TV picture. 34 REC i Pr-12 ACMSPSETR12 ON OFF OSDf16:9 4:3 16:9 4:3 ABC OSD NICSTB THROUGH AUTO 4:3 16:9 REC Pr-12 ACMSPSETR12 TIME DATE SYSTEM ON OFF OSDf16:9 4:3 16:9 4:3 ABC OSD OK NIC DECODER EPC STB THROUGH Additional Operation - DVD part Last Condition Memory VCD1.1CDDVD This player memorizes the last condition for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled. Notes – Settings are stored in memory for use any time. – This player does not memorize settings of a disc if you switch off the player before commencing to play it. Screen Saver The screen saver picture appears when you leave the DVD Player in stop mode for about five minutes. Video Mode Setting VCD1.1VCD2.0DVD • With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. • To change the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video mode number selected is displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. • Video mode change sequence: MODE1 > MODE2 > MODE3 > MODE4 > MODE5 > MODE1 • If you turn off the the power, the video mode will be back to initial state (MODE1). OPERATION 35 Special Recording Copying from DVD To VCR This unit allows you to copy the contents of a DVD to a VHS. Note • If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc. “Lock” will blink on the display window. 1 11 Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. 2 22 Insert VHS Tape Insert a blank VHS videotape into the VCR deck. 3 33 Press PLAY 2 The DVD will go into play mode. • If the DVD disc menu appears, you may need to press the PLAY 2 manually to begin copying. 4 44 Press 0 on the front panel or PLAY 2 22 and 0 simultaneously on the remete control. The VCR will go into record mode. 5 55 Stop the Copy Process. When the DVD is finished playing, press A AA twice within 5 seconds to end the copy. • You must stop copy process manually when the DVD movie ends, or the unit may replay and record over and over again. Recording from another video recorder With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder. Note In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and will be referred to as VCR A. 1 11 VCR A should be connected to the SCART socket on the rear panel of your unit or the AV sockets on the front panel of your unit. 2 22 Insert the recorded tape into VCR A and a blank tape into VCR B. 3 33 To start recording, press the 0 on VCR B and PALY G on VCR A. 4 44 When you want to finish copying, press the 9 on both video recorders. Press A AA twice within 5 seconds at this unit. 36 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Correction DVD or VCR do not work properly. • DVD or VCR button is not switched properly. • Refer to page 2. No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. • The video cable is not connected securely. • Connect the video cable into the jacks securely. No sound. • The equipment connected with the audio c...