Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Full instructions for each test pattern are displayed on the screen before the test pattern is shown. To enter the Display set-up menu, move the menu highlight to the ‘Display’ button, then press OK. Press SETUP for a second time when you have finished. DV137 E-12 Operational set-up Preferred language This settings allows you to specify your preferred language. The default language is English, but three other languages (French, German and Dutch) are supported. Status messages This setting controls the ‘pop up’ messages that appear on screen. On Pop-up messages are enabled. Off No pop-up messages, only menus when required. Certain messages, such as ‘No Disc’ are always shown regardless of how this is set. Subtitle display This setting controls which subtitles displayed on your TV (although note that some discs may force the subtitles to be displayed regardless of how this item is set). Off No Subtitles. On Subtitles are displayed in the ‘preferred language’. Closed Caption Closed-caption information from the disc (where available) is sent to your TV. The default setting for Subtitle is ‘Off’. Note that not all discs will have your preferred language available as a subtitle. Some discs will require you to chose your preferred subtitle language from the disc menu and some discs may force the subtitles to be displayed regardless of how this item is set. Closed-caption information is available only on discs produced for the US and Canadian markets and will be displayed only by TVs that support NTSC-format signals. Auto power off This setting can be used to put your player into stand-by mode automatically if the player is left unused. Off The player will not enter stand-by mode automatically. 30 minutes The player will enter stand-by mode automatically after 30 minutes disuse. DVD priority Many DVD-Audio discs are actually dual DVD-Audio/DVD-Video discs. To decide which part is selected for playing, you can set the priority with this control. DVD-Audio The DVD-Audio part is played DVD-Video The DVD-Video part is played SACD priority Many SACD discs are actually hybrid SACD/CDs. To decide which layer is selected for playing, you can set the priority with this control. SACD The SACD layer is played CD The CD layer is played DivX subtitles If you use DivX subtitles, choose the appropriate language group from the list. The factory setting is ‘Normal’. DivX registration DivX Video-On-Demand (VOD) is a digital video delivery service that lets you copy video content from your computer to a CD or DVD for playback on your DV137. To register for this service, a player- generated registration code is required. This code can be seen by selecting the ‘DivX registration’ button. For more information on this service, please visit English DV137 E-13 Video set-up If your display device is HDMI-compliant, the DV137 can read the capabilities of the display device directly; the information allows the DV137 to configure its output automatically and optimally for the attached device. See page 22 for more information about connecting to HDMI devices. Main video output This setting is to tell the DV137 which of the available video outputs is the ‘main’ output, i.e., in the event of a conflict between video outputs, which output has priority. HDMI Select this item if you are connecting the DV137 to an HDMI-compliant device, and you are happy for the DV137 to configure itself automatically for the device it is attached to. This is the recommended setting if you are connecting the DV137 to an HDMI-compliant device. HDMI as DVI Select this item if you are connecting the DV137 to a DVI-compliant device, and you are happy for the DV137 to configure itself automatically for the device it is attached to. Analogue Select this setting if you are not connecting the DV137 to a HDMI-compliant device. Display standard This is set at the factory to be appropriate for the type of display device used in your country. Should you need to change this setting, the options are as follows. Auto The video output is taken from that recorded on the disc. When no disc is playing, the logo screen is displayed using the standard of the last disc played. NTSC NTSC is always used as the video standard. Note that PAL discs are converted to NTSC, but this causes some reduction in the quality of the video output (and may cause the video to become ‘jerky’). This is the best setting to use if your display device can accept only NTSC video (this is generally the case in North America); better results are obtained by using ‘Auto’, but your display device must be able to support PAL. PAL PAL is always used as the video standard. Note that NTSC discs are converted to PAL, but this causes some reduction in the quality of the video output (and may cause the video to become ‘jerky’). Better results will be obtained by using ‘Auto’, but your display device must be able to support NTSC. HDMI as DVI Even though your display device may be fully HDMI compliant, it i...