Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Page1-3,6.fm 4 ページ ２００４年４月２３日 金曜日 午前１０時２８分
Auto-Setup (Setup without Q Link functions)
≥When connecting to a television with the VIDEO OUT, S-VIDEO OUT or COMPONENT VIDEO OUT terminal (➡ page 3).
≥When connecting to a television that does not have the Q Link function (➡page 56 of Operating Instructions).
This unit’s Auto-Setup function automatically tunes all available TV stations and synchronizes the time when the TV channel that is broadcasting
time and date information is tuned.
≥When connecting to a television with RF socket only (➡page 4)
1 Turn on the television and select the appropriate AV
DVD
TV
input to suit the connections to this unit.
VOLUME
2 Press [Í DVD] to turn the unit on.
DIRECT TV REC
CH
Auto-Setup starts.
AV
This takes about 5 minutes.
Auto-Setup
(When connecting to a television with RF socket only)
HDD
DVD
SD/PC
Set the new RF output channel to TV (refer to the
instructions for your TV). Select an unused channel pre-
1
2
3
Ch
1
set on your TV and tune it to the RF output channel
CH
Auto-Setup in progress, please wait.
number shown on the unit’s display. (When the Auto-
4
5
6
RETURN: to abort
Setup screen does not appear clearly even after
performing the above operations, re-tune the channel until
VIDEO Plus+
7
8
9
the Auto-Setup screen becomes clear.)
RETURN
CANCEL
INPUT SELECT MANUAL SKIP
0
3 When Auto-Setup has completed, the Owner ID settings screen appears.
SKIP
SLOW/SEARCH
Press [1] and press the numbered buttons to enter a 4-
STOP
PAUSE
PLAY/x1.3
digit PIN number.
Owner ID
DIRECT NAVIGATOR
FUNCTIONS
PIN number ¢¢¢¢
Name
TOP MENU
House No.
RETURN
Postcode
ENTER
RETURN : leave
SUB MENU
RETURN
≥Make a note of the PIN number (don’t forget), as it is not possible to return to the factory
preset.
PROG/CHECK
4 Press [ENTER] twice to store the PIN number.
DISPLAY
STATUS
TIME SLIP
The cursor moves to “Name”.
5 Press [1].
TIMER
ERASE REC MODE
REC
F
CREATE
6 Press [3, 4] to select a letter and then press [1].
EXT LINK DUBBING CHAPTER AUDIO
Repeat this to enter the name.
A
B
C
7 Press [ENTER] to store the name.
8 Press [4] and [1], and then repeat steps 6, 7 to enter
and store “House No.” and “Postcode”.
9 Press [RETURN].
The Owner ID settings screen disappears.
To stop partway
Press [RETURN].
∫ If the clock setting menu appears
Set the clock manually (➡page 53 of Operating Instructions).
∫ To confirm that stations have been tuned correctly (➡page 51 of Operating Instructions)
∫ To restart Auto-Setup (➡page 52 of Operating Instructions)
[When connecting to a television with RF socket only (➡page 4)]
∫ To enter the satellite station’s name (➡page 51 of Operating Instructions)
The name of the satellite station is not set automatically. (“-- ---” will appear under “Name” in the program list). After Auto-Setup is completed,
enter the name manually.
∫ If you connect other equipment to AV2 terminal of this unit
Change the “AV2 Input” and “AV2 Connection” in the SETUP menu to match the connected equipment (➡ page 50 of Operating Instructions).
F0404KT0
- 6 -