Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Burn in is possible with some video displays in this setting. Screen saver ON is recommended. 21 CHANGING THE DEFAULT SETTINGS WALL PAPER Use this to select the image to be shown on the screen in the stop mode and CD play mode. BLUE Select this to display a blue background on the TV display. BLACK Select this to display a black background on the TV display. PICTURE (Factory default) Select this to display the wallpaper of the Cary Audio Design logo on the TV display. VFD BRIGHT Use this to select the brightness of the front panel VFD Display. OFF The VFD display is turned off. LOW The brightness is set to 25% of the normal setting. MEDIUM The brightness is set to 50% of the normal setting. NORMAL (Factory default) A normal brightness is set. AUDIO SETUP Choose Audio Setup and press ENTER. Use the UP^, DOWN ▼, LEFT i , and RIGHT ► cursor buttons to navigate the options within Video Setup. When making changes, navigate to the desired selection and press ENTER. Press the LEFT i arrow to return to the list of options within Audio Setup. To exit Audio Setup, choose the SETUP button to return to the main SETUP menu. HDMI OUT Use this to select the digital output format from the HDMI jack. With an HDMI cable, both uncompressed video data and digital audio data e.g., LPCM or bit stream data such as Dolby Digital, DTS, or MPEG data) can be transmitted with just a single digital cable connector. PCM (Factory default) Linear Pulse Code Modulation (LPCM) data is used in the TV or Monitor, and converted to analog sound. 22 CHANGING THE DEFAULT SETTINGS DIGITAL DIGITAL data is used in a Surround Sound Processor. Note: The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP compatible DVI input. There may be no image output or sound output if connected to a TV or display that is not compatible with the above format. Refer to the instruction manual of the TV or display to be connected to this unit for detailed information regarding the HDMI terminal. VOLUME Use this to select whether the analog output can have variable volume control. ON (Factory default) RCA offers 3.0 volts and XLR offers 6.0 volts variable level output in stereo analog connections. Use the remote control to adjust the volume from 0 to 64. OFF RCA offers 2.0 volts and XLR offers 4.4 volts fixed level output in stereo Left and Right analog connections. COMPRESSION Use this to set the dynamic range output when playing Dolby Digital discs. OFF (Factory default) Select OFF to have standard full dynamic range sound playback. MIDDLE Select MIDDLE to have powerful sound with clear dialog tracks even when the volume is low. This setting is suited for watching DVDs late at night with the volume low. (This setting is only valid for DVDs recorded in Dolby Digital.) FULL Select FULL to achieve a powerful sound with clear dialog tracks even when the volume is low. This setting is suited for watching DVDs late at night with the volume low. (This setting is only valid for DVDs recorded in Dolby Digital.) The FULL setting and the MIDDLE setting reduce the overall dynamic range of movies for late night viewing, to keep dialog easy to hear while reducing the volume level changes in a Dolby Digital soundtrack. 23 CHANGING THE DEFAULT SETTINGS DIGITAL CLOCK (48kHz/96kHz) Use this to set the Digital Clock output when playing the DVDs recorded in linear PCM audio. LPCM 48K Linear PCM and packed PCM signals are converted to 44.1 kHz or 48 kHz and output. (The PCM digital audio output signals are converted to 48 kHz or less in consideration of copyrights.) When making digital connections to an AV amplifier that is not compatible with 96 kHz/88.2 kHz digital input signals. When playing DVDs recorded in linear PCM or packed PCM and the unit is set to output digital and analog audio signals simultaneously, the analog audio output signals are also converted to 48 kHz or below, so we recommend setting to "LPCM 96k" and also making analog connections. LPCM 96k (Factory default) When playing linear PCM or packed PCM DVDs that are not copyright protected for 2-channel PCM audio signal up to 96 kHz, linear PCM signal are output as such without being converted from the digital outputs. When playing copyright protected linear PCM or packed PCM DVDs, in consideration of copyright, no digital signals are output for sources exceeding 48 kHz/16 bits. DISC SETUP Choose Disc Setup and press ENTER. Use the UP^ , DOWN ▼, LEFT i , and RIGHT ► cursor buttons to navigate the options within Disc Setup. When making changes, navigate to the desired selection and press ENTER. Press the LEFT i arrow to return to the list of options within Disc Setup. To exit Disc Setup, choose the SETUP button to return to the main SETUP menu. AUDIO Use this to set the language of the sound output from the speakers. ENGLISH (default) - Sele...
Эта инструкция также подходит к моделям:DVD-проигрыватели - HD720P (986.35 kb)