Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
(Always put the player in the INTERLACE mode when using an ordinary TV set not capable of accepting the Progressive Scan video signal. Otherwise ,there will be no display on TV and may cause damage to your TV.) 7.2.2 Recall Pressing the button will return all settings back to the factory default setting. 7.2.3 OSD Press the button to display the information of the disc during playback.. 7.2.4 MUTE During playback, the MUTE button is used to activate the mute function. It turns off the playback sound immediately. To resume normal sound level, press the MUTE button again. 7.2.5 Numeric Keys (0-9, +10) During playback you can locate a title by entering the title number or locate a specific chapter or track directly in combination with the SEARCH button. 7.2.6 Clear When you input numbers from NUMERIC KEYS , you can press CLEAR button to clear the numbers entered. 7.2.7 Zoom Successively pressing the ZOOM button to get different zoomed picture. In the state of zoom play, pressing the direction buttons can shift the pictures accordingly. Note: There may be zoom level differences among different types of discs. 7.2.8 3D Press the button to enjoy from a variety of surround sound effects. If the sound quality becomes distorted during playback, adjust the 3D mode to OFF. 7.2.9 Search To locate the desired title and chapter on a DVD disc, press the SEARCH button and search the desired title time and chapter time. 7.2.10 Setup Press the button to enter the SETUP menu. The SETUP menu allows you to change system settings. To exit the SETUP menu press the SETUP button again. 7.2.11 Arrow Keys(up, down, right, left) The ARROW KEYS allow you to navigate the cursor in the SETUP menu and the interactive selection menu of a DVD disc. Once the desired selection is highlighted ,press the ENTER button to change to that setting. 7.2.12 Enter As described in 7.2.11 , the ENTER button is used to confirm the setting highlighted by the cursor. 20 7.2.13 MENU During DVD playback, you can return to the interactive selection menu by pressing the MENU button. (the function applies to discs that contain a menu) During SVCD and VCD 2.0 playback the MENU button is used to switch the PBC mode ON/OFF. 7.2.14 Volume Control ( +) / (-) Press " +" button to increase the phones and the speaker volume, and press "-" to decrease the volume. 7.2.15 Title Press this button to enter the appointed title. (Only applicable to the DVD discs with this function.) 7.2.16 Slow Motion To play slow-motion during playback press the SLOW button. Each time you press the SLOW button,the slow- motion speed changes. 7.2.17 Repeat During DVD playback, continuously press this button to choose among repeat play of current chapter, title,or disc. During SVCD,VCD or CD playback, continusly press the button to choose between repeat play of current track or disc. 7.2.18 A-B Repeat Press A-B repeat at the beginning of the segment(point A) you want to play repeatedly. Press A-B repeat again at the end of the segment (point B). The DVD player will automatically return to point A and starts repeat playback of the selected segment(A-B). 7.2.19 Subtitle Press this button to display different subtitles available on the DVD or SVCD discs. (DVD discs can contain up to 32 different kinds of captions and SVCDs up to 4) 7.2.20 Return Pressing the button will return you to the main menu. 7.2.21 Angle Press the button while playing a scene recorded with multiple angles. This allows you change the camera angle of the scene you are watching. When playing multiple angle scenes, the angle icon will appear on the TV screen. Note: This operation is only available with DVD discs with this function . (Requires the support from discs.) 7.2.22 Program Press PROG button and enter numbers into the corresponding Interface. Press START to perform the programming play function. If you don't want a programming play, just enter into the programming menu and move the highlighted bar to the STOP column. Then cancel the programming play by making confirming and choose the EXIT column. 7.2.23 Auto In tuner state, you press the button, the player will search the different frequency automatically. When find the radio program, the player will automatically save the radio Program. 7.2.24 Memory Press the button to save the position of radio program. (please refer to 8.4.2) 22 8. The Functions of the Player 8. The Functions of the Player 8.1 Use KARAOKE Function 8.1.1 Connect with Microphone Turn the MIC VOLUME knobs on the front panel to the minimum and then connect microphones to MIC jacks. 8.1.2 Start KARAOKE (1) Turn MIC VOLUME knob to adjust the volume of microphone. (2) You may press numeric keys on the remote control to select the track you want when it is playing a karaoke disc. 8.1.3 Special KARAOKE Functions Press AUDIO button on the remote control and choose from the following: [STEREO] [MONO LEFT] [MONO RIGHT] [MIX-MONO] [PARTNER LEFT] [PARTNER RIGHT] Cancel Original Sound You may press the AUDIO butt...