Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
To set the recorder’s RF output channel: 1 When the recorder is turned off, press and hold CH ( / ) on the front panel for more than five seconds. [RF03] or [RF04] appears in the display window. 2 Press CH ( / ) to change the RF output channel (RF03 or RF04). 3 Tune the TV to this channel. Using your recorder Turning your recorder on and off To turn your recorder on and off: 1 Plug the power cord into an electrical outlet. 2 Press the POWER button to turn on your recorder. 3 Press the POWER button again to turn off your recorder. Initial Setup Wizard The first time you turn on the recorder, the Initial Setup Wizard opens so you can set the language, channels, and clock. To set up your recorder with the Setup Wizard: 1 Use / to select a language for the Setup menu and on-screen display, then press ENTER. 2 Check your antenna connections, then press . 3 Press ENTER to begin the channel search. NS-DRVCR DVD Recorder/VCR 4 Select Auto or Manual to set the clock, then press ENTER. Auto • Press / to choose your Time Zone. • Press to choose the Daylight Savings option. Press / to choose Auto, ON, or OFF. • Press ENTER to confirm your setting. Manual • Enter the necessary information for year, date, and time. / (left/right): Moves the cursor to the previous or next column. / (up/down): Changes the setting at the current cursor position. • Press ENTER to confirm your setting. 5 Press ENTER to exit the menu. You can reset the Initial Setup Wizard from the Factory Set option in the setup menu (see “General Settings” on page 15). Note Playing a tape To play a tape: 1 Press VCR to switch control to the VCR deck. 2 Insert a pre-recorded video cassette. • If the recorder is turned off, it turns on automatically when the tape is loaded. • If the Timer indicator lights on the front panel display window, press POWER once. 3 Press PLAY ( ) to start playback. If a tape without a safety tab is inserted, the recorder starts playback automatically. 4 Press STOP ( ) to stop playback. If the tape reaches the end before you press STOP ( ) the recorder automatically stops, rewinds, then ejects the tape. S-VHS Quasi Playback (SQPB) Note • Your recorder can play back S-VHS recorded tapes, however, it cannot make recordings using S-VHS format tapes. VCR playback options Buttons Operations EJECT ( ) Press to eject the tape in the VCR deck. PAUSE ( ) Press to pause playback. Press repeatedly to step forward one frame at a time Note: After 5 minutes in STILL mode the recorder stops to protect the tape and video heads. FORWARD ( ) Press to scan forward. In STOP mode, fast forwards the tape. In PAUSE mode, starts slow motion playback Note: After 3 minutes in SEARCH or SLOW MOTION mode the recorder returns to PLAY mode to protect the tape and video heads. Buttons Operations BACKWARD ( ) Press to scan backward. In STOP mode, rewinds the tape. Note: After 3 minutes in SEARCH mode the recorder returns to PLAY mode to protect the tape and video heads. CLEAR Press to reset the current tape counter to 0:00:00. To automatically go to tape counter position 0:00:00, press RETURN while the tape is in STOP mode. TRACK ( +/ -) Press to manually reduce noise on the screen during tape playback. Tracking is set automatically when a tape is inserted. AUDIO Press to set the tape audio to HIFI, LEFT, RIGHT, or NORMAL. Press the / buttons to select the tape audio you want. I.SKIP Press repeatedly during playback to skip forward 30 seconds on the tape (max. 120 seconds.) Playing a disc To play a disc: 1 Press DVD to switch control to the DVD deck. 2 Press OPEN/CLOSE ( ) to open the disc tray. 3 Load the disc into the tray, with the playback side down. 4 Press OPEN/CLOSE ( ) to close the tray. Playback starts automatically. If playback does not start, press PLAY ( ) or start the playback using the HOMEmenu. 5 To stop the playback, press STOP ( ). The recorder records the stopped point, depending on the disc. appears on the screen briefly. Press PLAY ( ) to resume playback (from the stopped point). If you press STOP ( ) again or unloaded the disc, ( appears on the screen and the recorder clears. 6 Press OPEN/CLOSE ( ) to open the tray and remove the disc. Press OPEN/CLOSE ( ) to close the disc tray, or press POWER ( ). The disc tray closes automatically and recorder turns off. If parental control is set and the DVD is not within the rating settings, you must input the password. (See “Lock Settings” on page 16). Note Disc playback features Buttons Operations Discs OPEN/CLOSE Press to open or close the disc All tray. ( ) NS-DRVCR DVD Recorder/VCR Buttons Operations Discs PAUSE ( ) Press to pause playback. All Press repeatedly to play frame-by-frame. Note: You can also use the / buttons to step backward or forward while in PAUSE mode. DVD ALL BACKWARD ( ) FORWARD ( ) During playback, press repeatedly to select the scan speed (either backward or forward). DVD—5 steps DivX, audio CD—3 steps DVD ALL DivX ACD In PAUSE m...