Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
3. Connect the interface cable to the interface port of your computer. Since USB .0is backwards compatible with USB 1.1, the Freecom Mobile DVD RW Recorder can be connected to all USB ports. When connected to a USB 1.1 port, however, the performance (data transfer rate) of the Freecom Mobile DVD RW Recorder will be much lower than when the drive is connected to a USB .0 port. 6 EN 1 Start Up Note: You can plug the USB cable into your computer and unplug it while the computer is running ("hot plug & play"). Remove the cable from the computer when doing so, never remove the cable from the drive when the computer is on. For optimal performance, the Freecom Mobile DVD RW Recorder should always be connected to a USB .0/Firewire port. Attention! Before switching off the Freecom Mobile DVD RW Recorder manually, make sure to safely remove the Freecom Mobile DVD RW Re- corder via your operating system (the „unplug or eject hardware“ option in the Windows taskbar). Failing to do so may result in loss of data. EN 1 Start Up Note: You can plug the USB cable into your computer and unplug it while the computer is running ("hot plug & play"). Remove the cable from the computer when doing so, never remove the cable from the drive when the computer is on. For optimal performance, the Freecom Mobile DVD RW Recorder should always be connected to a USB .0/Firewire port. Attention! Before switching off the Freecom Mobile DVD RW Recorder manually, make sure to safely remove the Freecom Mobile DVD RW Re- corder via your operating system (the „unplug or eject hardware“ option in the Windows taskbar). Failing to do so may result in loss of data. 1. Driver Installation Under Windows 2000 , XP and Vista a separate driver is not required. The drivers will be installed automatically by the operating system after plugging in the Freecom Mobile DVD RW Recorder into the USB port of your computer. Your Freecom Mobile DVD RW Recorder is fully backwards compatible with USB 1.1. The installation for USB 1.1 is the same as described below for USB 2.0. 1. Allocation of the drive letter to the Freecom drive After successfully completing the installation of the Freecom Mobile DVD RW Recorder, a new drive letter is assigned automatically (the first available letter after the internal Mobile DVD RW Recorders). This can shift the drive letter of an internal CD-ROM drive (for example, 'D' to 'E'). If this leads to problems, it is possible to change the drive letter assignment as follows: 1. Click "Start" - "Settings" - "Control Panel" - "Administration" - "Computer Administration". 2. Click "Disk Maintenance" and then select the Freecom drive. 3. In the "Operation" menu ("Action" in Windows XP), select All Tasks and then click Change drive letter and path. 4. In the next window, click "Change" and select a drive letter in Assign the following drive letters. 5. Click "Yes" to confirm your change. Freecom Mobile DVD RW Recorder Freecom Mobile DVD RW Recorder EN Chapter : Installing the application software To record blank media, you must first install the Recording Software. We recommend using the software which has been provided with your drive. PC: To install the application software, insert the "Application & Manuals" CD, klick "Roxio Creator". Follow the instructions on screen. Mac: To install the application software, insert the "Application & Manuals" CD, klick "Software Installation" - "Roxio Toast" and "LightScribe". Follow the instructions on screen. Note: If you wish to use other software, please find out from the supplier whether his products support the Freecom DVD RW Recorder. Installing the application software Installing the application software .1 Special Instructions before Writing a CD / DVD • You should realize that writing CD/DVDs is principally a sensitive data transmission procedure which can be disrupted by even the smallest mechanical disturbance. • Never clean the Freecom Mobile DVD RW Recorder with a commercially available CD or a CD-ROM cleaning set. This can damage the drive. • Recordable and Rewritable CD/DVDs (blanks) are more sensitive than commercially available CD/DVDs. Use only a solvent-free, non-abrasive marker when writing on a CD/DVD. • Do not stick any conventional labels on the CD-Rs/CD-RWs, since the adhesive can attack the medium. Special labels for CD-R/CD-RW media are available in retail computer stores. Never remove a label from a CD-R/CD-RW media otherwise you will damage the protective layer and make the CD-R/CD-RW unusable. • The drive recognizes the medium as soon as it is placed into the drive. CD-R media are compatible with the vast majority of CD-ROM drives and CD audio players and work in most DVD-ROM drives. DVDs created on this DVD Recorder can be viewed on nearly all DVD players and DVD-ROM drives. EN For optimal results, use CD/DVDs with a brand name. Freecom Mobile DVD RW Recorder EN Chapter : Using the Drive How to Use the Discs Attention! When using CD-ROM, CD-R, CD-RW or DVD R/RW discs, don’t...