1/4 No. Title Length Edit 10:10 AMTitle List (Original) 01 LINE 1 01:29:03 > LINE 1 08:00 PM May/02/2007 T 02 03 04 LINE 1 LINE 1 LINE 1 00:31:23 01:59:00 00:58:56 > > > B “Timer” Used to set a new timer recording for a disc or VHS tape, as well as change or cancel the timer recordings you set. C “Edit” Used to create or edit a Playlist (unfinalized DVD-RWs (VR mode)/DVD-Rs (VR mode) only). D “Dubbing” Used to dub from a disc to a VHS tape and vice versa, and also dub from a DV/D8 format tape to a disc. E “Disc Setting” Used to rename, protect, format, or finalize a disc, or erase all titles on the disc. Also, displays the disc information. F “Setup” Displays the “Setup” display for setting up the recorder to suit your preferences. Title List (Original) 10:10 AM Press ENTER : Title Menu for DVD Title List. Setup Disc Setting Edit Title List Timer Dubbing 6 Sub-menu The sub-menu appears when you select an item from a list menu (e.g., a title from the Title List menu), and press ENTER. The sub-menu displays options applicable only to the selected item. The displayed options differ depending on the situation and disc type. Select an option by pressing M/m and ENTER. Example: The Title List menu Title List (Original) 10:10 AM No. Title Length Edit 01 LINE 1 02 LINE 1 03 LINE 1 04 LINE 1 LINE 1 May/02/2007 08:00 PM T 1/4 Play Title Erase Chapter Erase Protect Title Name A·B Erase Divide Title Options for the selected item OPTIONS The OPTIONS menu appears when you press OPTIONS. You can search for a title/chapter/ track, check the playing and remaining time, or change settings for audio/angle/subtitle. The displayed options differ depending on the media type. Press M/m to select an option, press , to select the desired item, and press ENTER. Example: When you press OPTIONS while a DVD VIDEO is playing. DVD VIDEO T Title 1/4 C Chapter 1/1 Time 00:00:25 Audio ENG Dolby D2ch (1/1) Remain 00:01:30 Subtitle 2/2 ENG Angle 1/1 Selectable options Selectable options on the System Menu differ depending on the media type, disc condition, and operating status. Example: When a disc or a VHS tape is stopped. Type Selectable option +RW RWVR *1 RWVideo *1 +R *1 *1 RVR *1 *1 RVideo *1 *1 DVD RAM VCD CD DATA CD DATA DVD *2 *1 Unfinalized disc only *2 With a disc inserted To return to the previous display Press O RETURN. Notes • The OPTIONS menu may not appear during DVD recording. • The System Menu does not appear when recording on a DVD, or dubbing from VHS tape to a DVD. • You cannot use the DVD or VIDEO buttons with the System Menu turned on. Hookups and Settings Hookups and Settings Hooking Up the Recorder Follow steps 1 to 7 to hook up and adjust the settings of the recorder. Notes • Plug cords securely to prevent unwanted noise. • See the instructions supplied with the components to be connected. • You cannot connect this recorder to a TV that does not have a video input jack. • Be sure to disconnect the power cord of each component before connecting. Do not connect the power cord until you reach “Connecting the Power Cord” on page 20. Step 1: Unpacking Check that you have the following items: • Audio/video cord (phono plug . 3 y phono plug . 3) (1) • Remote commander (remote) (1) • Set top box controller (1) • Size AA (R6) batteries (2) • HDMI cord (1) Step 2: Connecting the Cable Box/Satellite Receiver (Tuner) This recorder does not include a TV tuner. To record TV programs on this recorder, you need to connect the recorder to a tuner that has audio/ video output jacks. If you have been using your VCR connected to an antenna, connect this recorder to your VCR using an audio/video cord. In this way, you will be able to record TV programs. You cannot record on this recorder if you have: – a cable box or satellite receiver without audio/ video outputs. – cable with no cable box. – antenna only (no cable TV). In the cases above, contact your cable service or satellite service company to see if they can provide you with a compatible cable box or satellite receiver. Using the cable box/satellite receiver control function This function allows the recorder to control a cable box or satellite receiver via the supplied set top box controller. You can also use the recorder’s remote control to change channels on the cable box/satellite receiver whenever the cable box/ satellite receiver and the recorder are turned on. To use the cable box/satellite receiver control function, you need to: – Check the brand code of your cable box/satellite receiver. See “Cable Box/Satellite Receiver Brand Code” (page 121). – Connect the set top box controller (page 13). – Set the brand code number and the recorder’s input that is connected to the cable box/satellite receiver (page 23). After setting up the cable box/satellite receiver control, check that the recorder can correctly control the cable box or satellite receiver (page 26). Connecting a cable box/satellite receiver and set top box controller Connect the LINE IN jacks using an audio/video co...