Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
b M/MARK1 button and m/MARK2 button When the setup or disc menu is visible, use these buttons to change menu settings. When the THUMBNAIL button is lit, you can use these for thumbnail selection. During recording and playback, the M/MARK1 or m/ MARK2 button can be pressed with the SET button held down to record a SHOT MARK1 or SHOT MARK2 as an essence mark. To delete or change essence marks, use the supplied PDZ1 Proxy Browsing Software. c IN indicator and OUT indicator IN indicator: This lights when an In point exists. It flashes if an attempt is made to set an In point after a recorded Out point. OUT indicator: This lights when an Out point exists. It flashes if an attempt is made to set an Out point before a recorded In point. 4 Shuttle/jog/variable-speed playback control block For details about playback operations with these buttons and dials, see page 41 “Playback” in Chapter 3. VAR JOG SHUTTLE 1VAR button 2JOG button 3SHUTTLE button 4Jog/shuttle transport indicators 5Jog dial 6Shuttle dial a VAR (variable) button To play back in variable-speed mode using the shuttle dial, press this button, turning it on. b JOG button To play back in jog mode using the jog dial, press this button, turning it on. c SHUTTLE button To play back in shuttle mode using the shuttle dial, press this button, turning it on. d Jog/shuttle transport indicators These show the playback direction in jog, shuttle, or variable-speed mode. b (green): Lights during playback in the reverse direction. B (green): Lights during playback in the forward direction. x (red): Lights during still image display. e Jog dial Turn this for playback in jog mode. Turn clockwise for forward direction playback, and counterclockwise for reverse direction playback. In jog mode, the playback speed varies in the range ±1 times normal speed, according to the rotation rate of the jog dial. The dial has no detents. f Shuttle dial Turn this for playback in shuttle mode or variable-speed mode. Turn clockwise for forward direction playback, and counterclockwise for reverse direction playback. • In shuttle mode, the playback speed varies in the range ±20 times normal speed (using MPEG HD/DVCAM), according to the angular position of the shuttle dial. • In variable-speed mode, you can finely adjust the playback speed from –1 to +2 times normal speed, according to the angular position of the shuttle dial. The shuttle dial has a detent at the center position, for still image playback. Note When OPERATIONAL FUNCTION >SEARCH ENABLE in the setup menu is set to “DIAL DIRECT” , return the shuttle dial to the center position after using it. 5 Recording/playback control block 1 PREV/TOP button 2 PLAY button 3 NEXT/END button TOP F REV F FWD END NEXT STOP TS REC STANDBY 4STOP/STANDBY button 5TS REC button a PREV (previous)/TOP button This functions as a PREV button when pressed alone, and as a TOP button when pressed together with the SHIFT button. PREV button: Press this button, turning it on, to jump to the first frame of the current clip. When pressed at the first frame of the current clip, this button jumps to the first frame of the previous clip. TOP button: Press this button to jump to the first frame of the first clip. You can perform a high-speed search in the reverse direction by pressing the PREV button together with the PLAY button. b PLAY button Press this button, turning it on, to start playback. Press the STOP button to stop playback. You can perform a high-speed search in the forward or reverse direction by pressing this button together with the NEXT button or PREV button. c NEXT/END button This functions as a NEXT button when pressed alone, and as an END button when pressed together with the SHIFT button. NEXT button: Press this button, turning it on, to jump to the first frame of the next clip. END button: Press this button to jump to the last frame of the last clip. You can perform a high-speed search in the forward direction by pressing the NEXT button together with the PLAY button. d STOP/STANDBY button This functions as a STOP button when pressed alone, and as a STANDBY button when pressed together with the SHIFT button. STOP button: Press this button, turning it on, to stop recording or playback. The frame at the stop position is displayed. Chapter 1 Overview Names and Functions of Parts Chapter 1 Overview STANDBY button: Press this button to put the unit into standby-off mode (the STOP button lights, and the STANDBY indicator lights). Press it again to return to the original state (STOP button lit, STANDBY indicator off). This unit has a function that can put it into standby-off mode automatically after a certain length of time passes in disc stop mode. For details, see the explanation of STILL TIMER in the setup menu (page 83). e TS REC (transport stream record) button Press this button together with the PLAY button to start recording. Recording starts on the unrecorded part of the disc. Press the STOP button to stop recording. A clip is created from th...