Оценок - 3, средний балл: 4.7
(
)
)
|
К этому устройству также есть другие инструкции:
DVD-проигрыватели - RDR-AT107 (3.02 mb)
DVD-проигрыватели - RDR-AT107 (7.44 mb)
Фрагмент инструкции
Do not connect the R input jack. b Notes • Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord. • Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output jack connected to the input jack of this recorder. This may cause noise (feedback). • Do not connect more than one type of video cord between the recorder and your TV at the same time. Connecting to a Satellite or Digital Tuner (RDRAT100/ AT200 only) Connect a satellite or digital tuner to this recorder using the LINE 1/DECODER jack. Disconnect the recorder’s mains lead from the mains when connecting the tuner. To use the Synchro Rec function, see below. Do NOT set “LINE 1 In” to “Decoder” in the “Video In/Out” setup (page 123) when making this connection. Hookups and Settings to SCART input SCART cord (not supplied) to T LINE 3 – TV to i LINE 1/DECODER Satellite tuner, TV CanalSat, etc. If the satellite tuner can output RGB signals This recorder accepts RGB signals. If the satellite tuner can output RGB signals, connect the TV SCART connector on the satellite tuner to the LINE 1/DECODER jack, and set “LINE 1 In” to “RGB” in the “Video In/Out” setup (page 123). Refer to the instructions supplied with the set top box receiver. If you want to use the Synchro Rec function This connection is necessary to use the Synchro-Recording function. See “Recording from connected equipment with a timer (Synchro Rec.) (RDR-AT100/ AT200 only)” on page 64. Set “LINE 1 In” in the “Video In/Out” setup (page 123) according to the specifications of your satellite tuner. Refer to your satellite tuner’s instructions for more information. DVD recorder b Notes • Synchro-Recording does not work with some tuners. For details, refer to the tuner’s operating instructions. • If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected tuner. Connecting an External Decoder You can watch or record external decoder (PAY-TV/Canal Plus analogue decoder) programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder. To watch the connected external decoder (PAY-TV/Canal Plus analogue decoder) programmes while the recorder is in standby mode, set “Standby Mode” to “Mode 2” in the “Basic” setup (page 118). If not, the picture will not appear. Note that when you set “LINE 1 In” to “Decoder” in step 7 of “Setting external decoder (PAYTV/ Canal Plus analogue decoder) programme positions” (page 33), you will not be able to select “L1” because Line 1 will become a dedicated line for the decoder. Connecting a decoder External decoder (PAY-TV/ TV Canal Plus analogue decoder) Aerial cable (supplied) SCART cord (not supplied) to AERIAL OUT to i LINE 1/DECODER to AERIAL IN to SCART input SCART cord (not supplied) to T LINE 3 – TV DVD recorder Setting external decoder (PAYTV/ Canal Plus analogue decoder) programme positions To watch or record PAY-TV/Canal Plus analogue programmes, set your recorder to receive the programme positions using the on-screen display. In order to set the programme positions correctly, be sure to follow all of the steps below. 1 Press SYSTEM MENU. The System Menu appears. 2 Select “Initial Setup” using Эта инструкция также подходит к моделям:
DVD-проигрыватели - RDR-AT100 (7.5 mb)
DVD-проигрыватели - RDR-AT105 (7.5 mb)
DVD-проигрыватели - RDR-AT200 (7.5 mb)
DVD-проигрыватели - RDR-AT205 (7.5 mb)