Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Disconnect the unit’s mains lead from the mains when connecting the decoder. You do not need to turn on the unit to view the from the connected tuner on your TV. To watch or record satellite/cable box, set [AV2 Connection] option to [Decoder] (see page 15) and set the program’s [Decoder On/Off] option to [On] on the Setup menu (page 13). If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected decoder. Connecting to the AV2 DECODER jack Connect a VCR or similar recording device to the AV2 DECODER jack of this unit. You do not need to turn on the unit to view the signals from the connected tuner on your TV. To watch or record the source from AV2 DECODER jack, set [AV2 Connection] option to [Other Device] (see page 15) and set [AV2 Recording] option to [Auto], [CVBS], [RGB] or [S-Video] as required (see page 17). • Pictures containing copy protection be recorded. • If you pass the unit signals via the VCR, on your TV screen. Be sure to connect your VCR to the unit and TV in the order shown below. To watch video tapes, watch the tapes through a second your TV. • When you record to a VCR from this unit, do not switch the input source TV by pressing the TV/VCR button on the remote. • If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the AV2 DECODER jack. • If you disconnect the unit’s mains lead, you will not be able to view the signals from the connected VCR or tuner. 11 Connecting to the AV IN 3 Jacks Connect the input jacks (AV IN 3) on the unit to the audio/video your accessory component using audio/ Connecting a Digital Camcorder Using the front panel DV IN jack, it is possible to connect a DV digital camcorder and digitally transfer DV tapes to DVD. Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this unit. The DV IN jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-TAPE video decks. Disconnecting the DV cable while recording a contents of the connected digital camcorder may result in malfunction. 12 Auto setup 1 Turn on the unit ON REMOTE The initial setup wizard appears on the screen. 2 Choose a language: 3 Select the chosen language: 4 Check the antenna and go to the next step: 5 Choose a country you are using the unit: 6 Select the [Start] and starts channel scan: 7 Choose a clock setting mode: 8 Select the chosen clock setting mode: 9 Set the clock: This step is not available for Auto mode 10 Close the initial setup: POWER vv VV ENTER ENTER vv VV BB BB ENTER vv VV ENTER vv VV bb BB ENTER ENTER When the first time to turn on the unit, the wizard sets the language, clock and channels automatically. 1 Turn on the unit ON REMOTE The initial setup wizard appears on the screen. 2 Choose a language: 3 Select the chosen language: 4 Check the antenna and go to the next step: 5 Choose a country you are using the unit: 6 Select the [Start] and starts channel scan: 7 Choose a clock setting mode: 8 Select the chosen clock setting mode: 9 Set the clock: This step is not available for Auto mode 10 Close the initial setup: POWER vv VV ENTER ENTER vv VV BB BB ENTER vv VV ENTER vv VV bb BB ENTER ENTER When the first time to turn on the unit, the wizard sets the language, clock and channels automatically. Auto setup - more you can do Adjust the programmed channels Press HOME, then use b bb B BB to select [Setup] option. Press ENTER while [Start] is selected. The SETUP menu appears on the screen. Select the [Program Edit] on the second level options then press B BB to move to the third level. Press ENTER while [Edit] option is selected. The channel editing screen appears on the screen. Select which channel you would like to edit and press ENTER. An option menu appear on the left side of the screen. [Program Edit]: Change the settings [Station Rename]: Change a name [Move]: Moves the program’s location on the program list. [Delete]: Delete the selected channel from [Decoder On/Off] Sets the channels for the decoder. You need this setting to watch or record satellite/cable box. Press ENTER the display. Press ENTER again to turn off the setting. [NICAM Auto/off]: Sets the channels for the NICAM broadcast. Editing a channel You can change the settings of programmed channel by selecting Edit] option on the left side of the channel editing screen. [PR]: Indicates the selected channel position. [Seek]: Searches for a channel automatically. Searching stops when the unit tunes in a channel. [Ch.] Changes the channel number. [MFT] Fine tunes the channel to obtain a clearer picture. [OK]: Confirm the settings and return to the channel list menu. Using the Home Menu ON REMOTE 1 Displays the HOME menu: HOME 2 Select a main option: bb BB 3 Select a sub option: vv VV 4 Execute the selected option ENTER 5 Exit the HOME menu: HOME 13 Using the Home Menu - more you can do Adjust the SETUP settings Setup ON REMOTE Start – Displays SETUP menu...