Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
576i: 576 interlaced 576p: 576 progressive 720p: 720 progressive 1080i: 1080 interlaced 1080p: 1080 progressive eTITLE Indicates current title number. fCHAP (Chapter) Indicator Indicates current chapter number. gRepeat Mode Indicator Indicates when playing in repeat mode. hA-B Repeat Mode Indicator Indicates when playing in A-B repeat mode. iAGL (Angle) Indicator Indicates when playing a scene recorded with multi angles. jRemote Control Indicator Indicates when Remote Control signal is received. kDisc Indicator BD: Indicates when an BD-ROM disc is loaded. HD DVD: Indicates when an HD DVD disc is loaded. DVD: Illuminates when a DVD disc is loaded. lCharacter Indicators Indicates total playing time, elapsed time, title number, chapter number or message, etc. HDMI YPbPr 1080 TITLE CHAP A-B 720 576 IP RPT AGL BD HD DVD abcdefghijkl Remote Control abcd • • • • • • • • • • a • • • • • • • • • POWER: Switches the player ON or OFF. TV POWER: Switches the TV ON or OFF. OPEN/CLOSE (Z): Opens and closes the disc tray. MARKER: Marks any point during playback. SEARCH: Displays Marker Search menu. AUDIO ( ): Selects an audio language or audio channel. LOCK: Press to lock the N / X, x, and s buttons on the front panel. Press again to release. SUBTITLE ( ): Selects a subtitle language. REPEAT: Repeat chapter, title. A-B: Repeat sequence. ANGLE ( ): Selects a disc camera angle, if available. • • • • • • • • • • b • • • • • • • • • Colour Buttons: Use these buttons as indicated by the video display during BD-ROM disc playback DISPLAY: Accesses On-Screen Display. DISC MENU: Accesses menu on a disc. TITLE: Displays the disc’s title menu, if available. b / B / v / V (left/right/up/down): Selects an option in the menu. ENTER ( ): Acknowledges menu selection. RETURN (O): Exits the menu. CLEAR: Removes a mark on the Marker Search menu or a number when setting the password. POP UP: Displays the disc’s popup menu, if available. (BD-ROM only) SETUP: Accesses or exits the Setup menu. • • • • • • • • • • c • • • • • • • • • x (STOP): Stops playback. N (PLAY): Starts playback. X (PAUSE/STEP): Pauses playback. m / M (SCAN): Search backward or forward. . / > (SKIP): Go to next or previous chapter. • • • • • • • • • • d • • • • • • • • • TV Control Buttons: See page 23. 0-9 numerical buttons: Selects numbered options in a menu. RESOLUTION: Sets the output resolution for HDMI and COMPONENT VIDEO OUT jacks. buttons are not available. Remote Control Operation Remote Control Battery Installation Remove the battery cover on Point the Remote Control at the remote sensor and press the buttons. the rear of the Remote Control, and insert two R03 (size AAA) Caution batteries with and Do not mix old and new batteries. Never mix different matched correctly. types of batteries (standard, alkaline, etc.). 10 Installation and Setup Rear Panel abcde f 11 Installation and Setupa2CH AUDIO OUT (Left/Right) Connect to a TV with 2 channel audio inputs. bVIDEO OUT Connect to a TV with video inputs. cCOMPONENT VIDEO OUT (Y Pb Pr) Connect to a TV with Y Pb Pr inputs. dHDMI OUT (Type A) Connect to TV with HDMI inputs. (Interface for digital audio and video) eSERVICE port Reserved for authorized service purposes. fCooling fan g5.1CH ANALOG AUDIO OUT Connect to a 5.1CH analog input on an A/V Amplifier/Receiver. hCOAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. iOPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment. jAC Power Cord Plug into the power source. 2CH AUDIO OUT L FRONT REAR R L CENTER WOOFER COAXIAL OPTICAL HDMI OUT (1080p) SERVICE VIDEO OUT Y DIGITAL AUDIO OUT PB PR COMPONENT VIDEO OUT R 5.1CH AUDIO OUT ghij HDMI connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable. 1. Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: • If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 17). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. (See page 17) • If [SPDIF] option is set to [Bitstream] on the setup menu and your TV does not support Bitstream Audio out in HDMI connection, audio sound may be distorted or may not output. In this case, set the [SPDIF] option to [PCM] in the setup menu. (See page 17) • Dolby Digital Plus and DTS-HD capability limited to 5.1 channels. • Dolby TrueHD processing for two channels only. • If a title or disc is recorded in a resolution lower than 1080p, the output resolution is automatically changed to no higher than 1080i (even if 1080p is selected in the menu). • The arrow on the cable connector body should face up for correct alignment with the connector on the player. (Type A) Tip: When you use HDMI connection, you can change the resolution for the HDMI output. (Refe...