Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Removing a USB Flash Drive – Withdraw the USB Flash Drive carefully. Notes: • This unit supports only USB Flash Drive or FAT32 format. • Do not extract the USB Flash Drive during etc.). • A USB Flash Drive which requires additional you have connected it to a computer is not • USB Flash Drive: USB Flash Drive that support • Movie Files (DivX), Music files (MP3/WMA) and photo can be played. For details of operations on each file, pages. • Regular back up is recommended to prevent data loss. • If you use a USB extension cable or USB HUB, the USB Flash may not be recognized. • Some USB Flash Drives may not work with this unit. • Digital camera and mobile phone are not supported. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. BD player USB Flash Drive 17 Using the Home Menu Adjust the Setup settings Adjust the Setup settings ON REMOTE ON REMOTE 1Displays the [Home Menu]: HOME 2 Select an option: b bb B BB 3Displays the selected option menu: ENTER 4 Exit the [Home Menu]: HOME 1Displays the [Home Menu]: HOME 2 Select the [Setup] option: b bb B BB , ENTER 3 Select a desired option on the first level: v vv V VV 4 Move to second level: B BB 5 Select a desired option on the second level: v vv V VV 6 Move to third level: B BB 7 Adjust or confirm the setting: v vv V VV , ENTER 8 Go back to the previous level: b bb 9 Exit the [Setup] menu: HOME [Movie] – Start video media’s playback or displays the [MOVIE] menu. [Photo] – Displays [PHOTO] menu. (page 29-30) [Music] – Displays [MUSIC] menu. (page 28) [Setup] – Displays the [Setup] menu. (page 18-22) Tip: If you select the [Movie], [Photo] or [Music] option when a USB Flash Drive is connected and a disc is inserted simultaneously, the menu for First level selecting a media will appear. Select a media then press ENTER. Note: The unit will be in stop mode then the [Home Menu] will appear if you Second level press HOME during playback. Third level 18 [DISPLAY] Menu TV Aspect Ratio [4:3 Letter Box] – Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] – Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [16:9 Original] – Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] – Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. Note: You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. Resolution Sets the output resolution of the HDMI video signal. Refer to “Resolution Setting” on page 15-16 for details about the resolution. [Auto] – If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. [576i] – Outputs 576 lines of interlaced [576p] – Outputs 576 lines progressive video. [720p] – Outputs 720 lines of progressive video. [1080i] – Outputs 1080 lines of interlaced video. [1080p] – Outputs 1080 lines of progressive video. 1080p Display Mode When the resolution is set to 1080p, select [24Hz] for of film material (1080/24p) with a HDMI-equipped display 1080/24p input. Notes: • When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50Hz]. • Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080/24p, the actual frame frequency of the video output will be 50Hz or 60Hz to match the video source format. • When the 1080p/24Hz video source is outputted via HDMI connection, the VIDEO OUT will not output any video signal. HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] – Select when connecting to a HDMI display device. [RGB] – Select when connecting to a RGB display device. 19 [LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and on-screen display. Disc Menu / Disc Audio / Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] – Refers to the original language in which the disc was recorded. [Other] – Press ENTER to select another language. Use number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 32. [Off] (for Disc Subtitle) – Turn off Subtitle. Note: Depending on the disc, your language setting may not work for some discs. [AUDIO] Menu Each disc has a variety of audio output Audio options according to the type of audio Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 15 for details. HDMI / SPDIF (Digital Audio Output) Select ...