Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
That is why Codec Type, Version and Higher resolution over specification is not supported. ¦ Supported subtitle file formats: .smi, .srt, .sub, .psb, .txt, .ass (The subtitle file should have exactly the same name to corresponding MPEG4 file name) Playback RETURNOKMOVE EXIT Disc NavigationCD DivX vv Photo vv Music vv Disc Navigation Programme Setup 4 4 Press the …† buttons to select the avi file (DivX), then press the OK or v button. RETURN EXITMOVE OK DivXCD ROOT [DivX].###.####.01.avi [DivX].###.####.01.avi ROOT 00/01 English - 53 Playback Playing back a VHS Tape (VCR) To play a standard VHS tape, just insert it into the VCR deck and press the PLAY button. You can turn on the Auto Play to enable the VCR deck to play automatically when you insert a videotape that is missing the Record Safety Tab. 1 1 Insert a standard VHS tape into the VCR deck. • When a videotape is inserted, power will turn on automatically. 2 2 Press the vII (PLAY/PAUSE) button on the remote control or on the front panel of the unit. The videotape will begin to play automatically if the Record Safety Tab is removed and Auto Play is turned on. 3 3 Press the • (STOP) button on the remote control or on the front panel of the unit. Tracking The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The PROG/TRK ( / ) button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually. 1 1 Adjust Tracking Manually During playback, press the PROG/TRK ( / ) buttons to remove white lines from the picture. Special VCR Playback Features While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Slow motion, and more. . Pause In Play mode, press vII (PLAY/PAUSE) button to still a single frame. . Frame Advance In the pause mode, press F.ADV/SKIP button to advance to the next frame. . Fps/Rps In Play mode, press Forward (vv) button or Rewind (oeoe) button to Fps/Rps at two speeds: • Picture Search - Press and release repeatedly to advance the tape forward or backword at 2,3,5,7 times normal speed. • Jet Search - Press and hold to advance the tape forward or backward at 7 times normal speed. . Skip In Play mode, press F.ADV/SKIP button to cue ahead exactly 30 seconds. Press F.ADV/SKIP button repeatedly up to 4 times to cue ahead 2 minutes. . Slow motion In pause mode, press vv button for slow motion. Press the vv button repeatedly to vary slow motion speed from 1/5 to 1/30 of normal playback. Press the PLAY button twice to resume normal viewing. 54 - English Variable Search System Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape when recording starts.The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows • This DVD Recorder & VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa. . Go To [0:00:00] Stop Use this feature when you want to search for the 0:00:00 counter position on a cassette. 1 1 Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00. 2 2 While a cassette is stopped, press the ANYKEY button. OKMOVE Go To [0:00:00] End Search Forward Intro Scan Reverse Intro Scan VCR 3 3 Press the …† buttons to select Go To [0:00:00], then press the OK button. The VCR will rewind or fast forward, searching for the 0:00:00 counter position, and then automatically stop at that position. Go To [0:00:00] oeoe 0 : 00 : 03 . End Search Use this feature when you want to search for a blank position to record a programme on a cassette. 1 1 While a cassette is stopped, press the ANYKEY button. OKMOVE Go To [0:00:00] End Search Forward Intro Scan Reverse Intro Scan VCR 2 2 Press the …† buttons to select End Search, then press the OK button. The VCR will fast forward, searching for a blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected. End Search vv 0 : 00 : 03 . Forward/Reverse Intro Scan Use scan and play when you don’t know exactly where a programme is located on a cassette tape. 1 1 While a cassette is stopped, press the ANYKEY button. OKMOVE Go To [0:00:00] End Search Forward Intro Scan Reverse Intro Scan VCR 2 2 Press the …† buttons to select Forward Intro Scan or Reverse Intro Scan, then press the OK button. When an Index mark is found the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark. Scan and Play vv 0 : 00 : 23 Playback English - 55 Recording Recording This section shows various DVD recording methods. • DVD Recording Before Recording ..................................................