Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
¶ < or > indicates that more items are available at the left/ right hand side of the menu bar. Press 1 2 (left/right cursor) to select these items. Switching on DVD 962SA DVD-VIDEO/SACD PLAYER VIDEO 1 If necessar y, switch on the TV and select the video input for your SACD player. 2 Press ON/OFF on the player front panel or STANDBY on the remote control. . The player display will light up. . If the player is connected to the TV, the star t-up screen appears. English OPERATION 17 English V Personal Preferences In this mode you can set your personal preferences for a number of player features. Some settings must always be selected. This depends on the type of audio equipment connected. For this see the section ‘Connecting to audio equipment.’ 1 2 ¶ ¶ General operation: Press SYSTEM MENU on the remote control. Select V in the menu bar and press 4 (down cursor). . The Personal Preferences menu appears. Use the 1 2 3 4 (left/right/up/down) keys to toggle through the menus, submenus and submenu options. . When a menu item is selected, the cursor keys (on the remote control) to operate the item are displayed next to the item. Press OK to confirm and return to the main menu. The following items can be adapted: Picture – TV Shape If you have a wide screen (16:9) TV, select 16:9. If you have a regular (4:3) TV, select 4:3. If you have a 4:3 TV, you can also select between: Letterbox for a ‘wide-screen’ picture with black bars top and bottom, or Pan Scan, for a full-height picture with the sides trimmed. If a disc suppor ts the format, the picture will be shown accordingly. VIEWING ON 16:9 VIEWING ON 4:3 LETTERBOX PAN SCAN – Black level shift (NTSC only) Select ON for adapting the colour dynamics to obtain richer contrasts. – Video shift Use this setting to personalize the position of the picture on your TV by shifting it to the left or right. Use 1 2 keys to shift and OK to exit. OK to exit TV shape Black Level shift Video shift Colour settings Personal colour q Sound – Digital and Analog output Settings for DVD/ VCD Connected audio system Digital out Analog out Amplifier or TV with two channel analog stereo Off Stereo or 3D Sound Amplifier or TV with Dolby Surround Off Dolby Surround - compatible Amplifier with two channel digital stereo PCM only Stereo or 3D Sound A/V receiver with multi-channel decoder (Dolby Digital, MPEG, DTS) All Stereo, 3D Sound, Dolby Surround -compatible or Multi-channel Multi-channel A/V receiver with 6-ch connectors Off Multi-channel – Digital output Factor y setting is ALL. If you connect equipment with a digital input change the setting to ALL or PCM (Pulse Code Modulation - see below) only. Both coaxial and optical outputs are then switched on (not for SACD). If your equipment doesn’t include a digital multichannel decoder, set the digital output to PCM. Both coaxial and optical outputs are then switched on. See ‘Digital and Analog output Settings for DVD/VCD’ above. 18 OPERATION English – PCM output PCM (Pulse Code Modulation) is a method of encoding audio information in a digital format. PCM samples analog audio information at a fixed sampling rate and measures the amplitude (volume) of the audio signal with a precision determined by the sampling size. Audio is encoded on CDs in the PCM format with a sampling frequency of 44.1kHz and a 16-bit sampling size. A 16-bit sample size can contain 65,536 possible levels of sound volume which corresponds to a dynamic range of 96dB. A DVD can be encoded in PCM with a sampling frequency of up to 96kHz and a 24bit sample size. off1nooff48KHz96KHzDigitaloutputPCMoutputAnalogoutputNightmodeKaraokevokalSpeakers The PCM setting on your player allows you to select the PCM sample-rate frequency of the analog and digital outputs. You can set it to either 48kHz or 96kHz. Factor y setting is 48kHz. Note when using digital outputs: ¶ If you have a digital amplifier with a PCM input of 96kHz, connected via digital output, choose this frequency in the menu. Do not choose 96kHz if your amplifier has a digital PCM input of 48kHz since then a strong distor ted sound may be produced. ¶ Due to copy-protection the digital outputs may be muted when 96kHz is selected, while the analog outputs will remain active. Switching the PCM output back to 48kHz will reactivate the digital output. – Analogue output Select Digital and Analog output settings for DVD/VCD. Select Stereo, Dolby Surround-compatible, 3D Sound or Multi-channel. Factor y setting is Multi-channel. Multi-channel: Select this setting when using a multi-channel audio/(video) receiver with six inputs. In this mode, the player will perform Dolby Digital 5.1-channel decoding when applicable, and Dolby Pro Logic decoding on DVD- Video and Video-CD discs with 2-channel sound tracks. No Dolby Pro Logic decoding is done with (Super) Audio CD discs. Dolby Surround-compatible: Select this setting when using an equipment with a Dolby Surround Pro Logic decoder. In this setting, the 5.1 audio channels (Dolby Digital, ...