Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
14 EN Note • [LPCM Output] setting is changeable only when [Digital Output] is set as [PCM Only]. • The higher the sampling rate, the better the sound quality. [Volume] - Set the default volume level. [Sound Mode] - Select a preset sound effect. [Night Mode] - Equalize loud sound and soft sound. Enable this feature to watch DVD movies at a low volume at night. Note • Applicable to Dolby Digital encoded DVD discs only. Preference Preference English Audio General Subtitle Off English Disc Menu Video 8 Adult Parental Control On PBC Audio Change Password Standard DivX Subtitle Version Info [Audio] - Select an audio language. [Subtitle] - Select a language for subtitle. [Disc Menu] - Select a language for disc menu. Note • For some DVDs, the subtitle or audio language can only be changed from the disc menu. • For a language that is not listed, select [Others]. Check the list of language codes (see “Language Code”), and then enter the respective language code. English [Parental Control] - Select a rating level to restrict the play of discs to children. These discs must be recorded with rating levels. EN 15 Setup Note • To play a DVD disc that has a rating level higher than your setting, enter the password first. (Refer to “Setup” > “General setup” > “Play a locked disc” for details) • The rating levels are countr y-dependent. To allow all discs to be played, select [8 Adult]. • Some discs have ratings printed on but are not recorded with ratings. This function has no effect on such discs. [PBC] - Enable or disable the PBC (playback control) feature. [Password] - Change the password for playing discs that are locked or restricted with rating levels. Note • If you forget the password, enter “136900” before you set a new password. 1 Select [Preference] > [Password] > [Change], and then press OK. » The interface for changing password is displayed. 2 Press OK again. » “0” is displayed behind [Old Password] as the first digit of old password. 34 Press Press / to set a value (0-9) to the first digit. 5 6 7 Repeat steps 3 and 4 to enter the 6-digit old password. Repeat steps 3 and 4 to enter the new password behind [New Password]. Repeat steps 3 and 4 to enter the new password behind [Confirm PWD]. . Change the password [DivX Subtitle] - Select a character set that suppor ts the subtitle of your DivX video. [Version Info] - Display the information about software version of this player. [Default] - Reset all settings to factory default, except for the settings for [Disc Lock], [Parental Control], and [Password]. 16 EN Software update Note • Power supply must not be interrupted during sof tware update. Check the current software version of this player, and then go to the Philips website for information about software update. Check the current software version 1 Press . 2 Select , and then press OK. 3 Select [Preference] > [Version Info], and then press OK. Model File Name Version RISC Servo Region Code DVP3800_12 DVP3800_12.BIN 12.11.30.14 0E.00.01.04 57.18.0D.C7 2 OK 14 4 Write down the last two digits “XX” behind [Version] (for example, “14” in the graphic above). » The version of current software is V XX. Perform the update 1 Go to ww w.philips.com/suppor t. 2 Search for suppor t information with “DVP3800/12” as the keywords. 3 Click the search result to display available suppor t information. 4 Read the Firmware Upgrade Readme File and follow the instructions to complete the software update. English EN 17 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the player. To keep the warranty valid, never tr y to repair the player yourself. If you have problems using this player, check the following points before you request ser vice. If you still have a problem, register your player and get suppor t at If you contact Philips, you will be asked for the model and serial number of this player.The model number and serial number are on the back of this player. Write the numbers here: Model No. __________________________ Serial No. ___________________________ No picture. • Refer to the T V user manual for how to select the correct video input channel. • Switch to the default mode if the progressive scan setting or the T V system setting is changed. No sound output from the TV. • Make sure that the audio cables are connected to the audio input sockets that are grouped with the selected video input sockets. No sound during DivX video playback. • The audio codes are not suppor ted. Disc cannot be read. • Make sure that this player suppor ts the disc. (Refer to “ Specifications” > “Playable media”) • For a recorded disc, make sure that the disc is finalized. . Recorded files (JPEG, MP3,WMA) cannot be played or read. • Make sure that the file was recorded in the format of UDF, ISO9660, or JOLIET. • Make sure that the number of files does not exceed the limitation (648 files maximum). • Make sure that this player suppor ts these files. (Refer to “ Specifications” > “Playable media”) D...