Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
e.g. 5 Press ADJUST (-/+) to select the setting number. e.g. See page 42 for details on “Mode”. 6 Press SELECT/ENTER. The menu disappears. 7 Press REC. Recording starts. AV record quality Custom setting 5 4 3 2 1 D / M1 D / M1 D / M1 D / M1 D / M1X P L P E P SP MP 9. 2 4. 6 3. 0 2. 2 1. 4 ModeSetting Rate Audio quality Total Recording Time: approx. 122min. (with 4.7 GB unused) Setting 2DVD D/M1SP 4.6 SELECT/ ENTER REC SELECT/ ENTER ADJUST Quick Menu Bit rate Special playback mode Disc management DVD compatible mode Aspect ratio(Video mode) DVD-Video:CHP create SAP Time bar Remain Exit AV record quality 35 Recording Recording a TV program (Continued) Selecting the recording mode Before recording, you can select the recording mode. During stop mode, press REC MODE button. By pressing the button repeatedly, you can select one from 5 settings of “AV record quality” appearing in the front panel display. Notes • During recording, you cannot change the recording parameters, such as modes, channels, etc. • The number of titles cannot exceed 99 for any disc. • During normal recording, you can set the programmed recording using the REC MENU. • You cannot start recording immediately before a programmed recording starts. • For recorded sound, see page 69. • During monaural sound recording, the same sound is recorded on both the left and right channels. • When “DVD compatible mode” is set to “Main” or “SAP”, the unit records the same sounds on both the left and r ight channels when receiving monaural sound. When receiving the multi-channel sound, the selected sound, Main or SAP, is recorded on both the left and right channels. • Depending on the disc contents, pressing REC button may take a longer time to start recording. • When a star ting time of a programmed recording comes, a recording in execution is stopped and the programmed recording starts. If you do not want to stop the recording, cancel the timer program before it starts. • Even if you set “Aspect ratio(Video mode)” ( page 33) to “16:9”, images are recorded in 4:3 aspect ratio when using a DVDR or DVD-RW disc with “Rate” set to “EP” (1.4 Mbps). • Be careful of a programmed recording across the change-over of Daylight-saving time ( page 27). To stop recording Press STOP. To pause recording (to omit an unnecessary portion) During recording, press . To resume recording, press it again. To change a TV channel to be recorded 1) During recording, press . Recording pauses. 2) Press CH or the number buttons to change the channel. 3) Press to resume recording. To view a TV program while recording another 1) Start recording on this recorder. 2) On a connected TV, select the TV mode. 3) Using the channel selector of the TV, select a desired channel on the TV. To set an end time of a recording which is in progress 1) During recording, press QUICK MENU. Quick Menu appears. 2) Press / to select “End time” then press SELECT/ENTER. The display changes as follows: e.g. 2 :13 pmEnd time 3) Press / to select an item then press ADJUST to change the value. 4) Press SELECT/ENTER. Notes • By setting an end time, it is memorized as a programmed one, and the indicator in the front panel display illuminates to indicate that the recorder holds a timer program of recording. • The programmed end time must be set for 5 minutes later than the current time. To play a title recorded on a DVD-RAM disc while recording another on the same disc (Recorded Title Play) DVD-RAM During recording, you can play a title recorded on the same disc. 1) While recording on a DVD-RAM disc, press EASY NAVI. 2) Press / / / to select “Play Contents”, then press SELECT/ENTER. 3) Press / / / to select a desired title, then press SELECT/ENTER. Playback of the selected title starts. Pressing STOP button stops playback, and the content currently recorded returns. If you press PLAY button, playback resumes from the location you last stopped. Notes • The playback picture may appear after a delay of several seconds. • While you are using this function, the following operations/ functions are not available. - Programmed playback (repeat playback, etc.) - Editing (Playlist programming, dubbing, title/chapter naming, title thumbnail setting, etc.) • Depending on the data condition, playback may pause. • When the recording mode is set to “XP” or “AT” (when a high bit rate is automatically set. page 42), this function is not available. Creating chapters automatically at regular intervals Set “DVD-Video:CHP create” ( page 33). Introduction Recording PlaybackEditing Function setup Others 37 Recording DVD-RAM DVD-RW DVD-R Recording an external source You can record programs from connected equipment on a DVD-RAM/R/RW disc. Connect according to A or B. A: Using the input jacks on the rear of the recorder B: Using the input jacks on the front of the recorder • To record a clearer picture, use the S video jack. To video output jack To audio output jacks Audio cable Video cable Rear of the recorder INPUT1 (L-1) Yellow WhiteRed INPUT...
Эта инструкция также подходит к моделям:DVD-проигрыватели - D-R4SU (2.95 mb)
DVD-проигрыватели - D-KR4SU (2.95 mb)
DVD-проигрыватели - D-R4SU (2.95 mb)