Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
4. Press button, then use / button to select the setting choice on the right. 5. Press ENTER button. 6. Press SETUP button to exit the menu. 1. Press SETUP during stop. 2. Press button to select Rating. 3. Press / button to select the setting option: Password or Rating. Rating Password Rating Password DVD Press / button to select the Password option, then press button. Enter your 4-digit security code and then press the ENTER button. If you forget the password, you can erase your current password by pressing number button 8 on the remote control four times, then press ENTER button to confi rm the setting. (PASSWORD: 8888) The Parental lock is Audio Digital out Night Mode The Parental lock is active. NOT active. 22 Rating DVD DVDs equipped with the password function are rated according to their content. The contents allowed by a parental lock level and the way a DVD can be controlled may vary from disc to disc. For example, if the disc allowed, you could edit out violent scenes unsuitable for children and replace them with more suitable scenes, or you could lock out playback of the disc altogether. 1) Press / button to select the Rating option, then press button. 2) Press / button to select parental lock level and then press the ENTER button. 3) Press / button to select the Password option, then press button. Enter your 4-digit security code and then press the ENTER button. You cannot play DVD discs rated higher than the level you selected unless you cancel the parental lock function and enter the 4-digit security code. Then press ENTER to confirm the password. If you forget your password at this moment, you cannot use the super password (8888). You need to go to the Rating setup menu to reset and input a new password. The parental lock levels are equivalent to the following ratings. Level 1 : Kid Safe Level 5 : PG-R Level 2 : G Level 6 : R Level 3 : PG Level 7 : NC-17 Level 4 : PG-13 Level 8 : Adult • DVDs may or may not respond to the parental lock settings. This is not a defect in the DVD player. Make sure this function works with your DVDs. • Rating level cannot be changed when the Parental lock is active. Using the TV System setup menu 1. Press SETUP during stop. 2. Press button to select TV System. 3. Press / button to select the setting item: Default, Screen Saver or HDMI CEC. 4. Press button, then use / button to select the setting choice on the right. 5. Press ENTER button. 6. Press SETUP button to exit the menu. TV System Default Screen Saver HDMI CEC Default This option allows you to return the unit’s setting to the factory default. Any changes you have made to the unit’s settings will be reverted back to the original setting except your password and rating level. Note When you reset the DVD player to the factory default, the DVD player will take 3-5 seconds to reset. Screen Saver To turn on or off the screen saver (screen protection to prevent image burn). Note When you leave the unit in DVD stop mode for approximately 2 minutes, the screen saver of the DVD player automatically appears if you set the Screen Saver to On mode. To turn off the screen saver, press the PLAY button. HDMI-CEC: REGZA-LINK® You can control this DVD unit from TV’s remote which is connected via HDMI cable. Functions available for the HDMI-CEC • One touch play When the operations with following button of this unit’s remote control are performed, the TV will automatically switch to appropriate input channel. Button for one touch play: [PLAY] (make sure a disc is inserted.) • System information Get & Set Menu Language: This unit recognizes the OSD languages set for the TV and automatically set the same language as the player menu language (OSD menu language) for this unit. Power off: When you turn the TV off, this unit will automatically turn off. Receiving operational signal from TV’s Remote: You can operate this unit with TV’s remote control. Check your TV owner’s manual for details. Notes • This function may not work properly depending on the TV you are connecting. • If the Video out is not set to “HDMI”, HDMI-CEC will not work. • Other components must be compatible with HDMI-CEC in order to use this function. REGZA-LINK is a registered trademar k of Toshiba Corporation. Function setup 23 Others Before Calling Service Personnel Others Before Calling Service Personnel Check the following guide for the possible cause of a problem before contacting service. Symptoms and correction Symptom Cause Correction Page No power. • The power plug is disconnected. • Connect the power plug securely into the wall outlet. 13-14 The DVD player turned off by itself. • The automatic power off function turned the unit off. • Press the PLAY button. 18 No picture or abnormal color (pinkish, greenish, etc.). • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. 18 • The video/HDMI cable is not connected securely. • Connect the video/HDMI ca...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SDK1000KU (1.07 mb)
DVD-проигрыватели - SDK1000K (1.07 mb)
DVD-проигрыватели - SDK1000KU (1.07 mb)