Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
-Check that the cable is connected to the correct device (See Connecting to television). -The DVD+R/RW must be finalized and in video mode format. -Ensure the disc label is facing up. -Check if the disc is defective by trying another disc. -Wrong region code. -Check the disc for fingerprint/scratches and clean with a soft cloth wiping from centre to edge. -Reset the unit by switching the player off, then on again. -Aim the Remote Control directly at the sensor on the front of the player. -Reduce the distance to the player. -Replace the batteries in Remote Control. -Re-insert the batteries with their polarities(+/- signs)as indicated. -To completely reset the player, unplug the AC cord from AC outlet for 5-10 seconds. Troubleshooting Problem Solution Player does not respond to some operating commands during playback. DVD Player cannot read CDs /DVDs Menu items cannot be selected Unable to select Progressive Scan on/off -Operations may not be permitted by the disc. Refer to the instructions of the disc jacket. -Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Player for repair. -Press STOP twice before selecting system setup menu. -Depending on the disc availability,some menu items cannot be selected. -Ensure that the output of the Video Out signal is switch to P-Scan/Component. Glossary Analog audio: An electrical signal that directly represents sound. In contrast, digital audio can also be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio: The width of a TV screen relative to it is height. Conventional TVs are 4:3 (i.e., the screen is almost square). Widescreen models are 16:9 (the screen is almost twice as wide as its height) AUDIO OUT jacks: Jacks on the back of the DVD System that send audio to another system (TV, Stereo, etc.) Bit rate: The amount of data used to hold a given length of music; measured in kilobits per seconds, or kbps. Or, the speed at which you record.Generally, the higher the bit rate, or the higher the recording speed, the better the sound quality. However, higher bit rates use more space on a disc. Chapter: Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title. Digital audio: An indirect representation of sound using numbers. During recording, the sound is measured at discrete intervals (44, 100 times a second for CD audio) by an analog-to -digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also Sampling frequency and Analog audio. Disc menu: A screen display prepared for allowing of selection of images, sound, subtitle, multi-angles etc. recorded on the DVD. Dolby® Digital: A system developed by Dolby Laboratories that compresses digital sound. It works with stereo (2ch) or multi-channel audio. DTS®: (Digital Theater System) DTS is a Multi-channel surround sound system, but it is different from Dolby Digital. DTS format was developed by Digital Theater Systems, Inc. JPEG: (Joint Photographic Experts Group) JPEG is a method of compressing still image files. You can copy JPEG files on CD-RW / R or DVD+R / R discs from a computer and play back the files on this unit. MP3: (MPEG Audio Layer 3) MP3 is a method of compressing files. You can copy MP3 files on CD-RW / R or DVD+R / RW discs from a computer and play back the files on this unit. Multichannel: DVD is specified to have each sound track constitute one sound field. Multichannel refers to a structure of sound tracks having three or more channels. Parental control: A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software’s level is higher than the user-set level. PBC (Video CD only): (Playback Control) This function enables you to play back interactive software using a menu screen. See also Title. PCM: (Pulse Code Modulation) PCM is a format that converts audio into digital data. It is mainly used for Audio CDs and DAT. This unit can play back sounds as realistic as possible by converting even compressed Dolby Digital and MPEG audio to PCM. Progressive scan: It displays all the horizontal lines of a picture at one time, as a signal frame. This system can convert the interlaced video from DVD into progressive format for connection to a progressive display. It dramatically increases the vertical resolution. Region code: Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Sampling frequency: The rate at which sound is measured by a specified interval to turn it into digital audio data. T...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SD4300 (4.89 mb)