Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Toshiba, модель SD-K531SU2

Производитель: Toshiba
Размер: 1.95 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Note: 1 2 3 17 Connections VHF/UHF IN (ANT) A B OUT (TV) IN (ANT) VHF/UHF IN (ANT) A B OUT (TV) IN (ANT) This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection. IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode. Incoming Cable Allows: * Recording of one channel while watching another. * Using the programmable timer to record only the channel selected at the converter box. * Recording of all channels through the converter box. Prevents: * Watching scrambled channels while recording another channel. * Using the DVD/VCR tuner to select channels. DVD/VCR Splitter Converter/Descrambler TV DVD/VCR Converter/Descrambler A/B Switch TV Incoming Cable Splitter Allows: * Recording of nonscrambled channels. * Recording of one channel while watching another. * Watching premium channels through the converter while recording nonscrambled channels. * Using the programmable timer. Prevents: Recording scrambled channels. DVD/VCR Splitter Converter/Descrambler TV A/B Switch VHF/UHF IN (ANT) A OUT B (TV) IN (ANT) Allows: * Recording of all channels through the converter box. * Recording a scrambled or unscrambled channel while watching another (scrambled or unscrambled) channel. * Using the programmable timer to record only the channel selected at the converter box. Prevents: Using the DVD/VCR tuner to select channels. A/B Switch Incoming Cable Converter/Descrambler 4 5 6 18 Connections Connecting to a TV Connect the DVD/VCR to your TV. To VIDEO OUT To ANALOG AUDIO OUT (yellow) (red) (white) Signal flow To wall outlet To video input (yellow) (red) (white) Audio/video cable (supplied) To audio inputs Notes: • Refer to the owner’s manual of the connected TV as well. • When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. • If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not supplied) and then connect to your TV. • Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected. TV or monitor with audio/video inputs Connecting to a TV Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you also connect the S-video or ColorStream® component video outputs to your TV/monitor. (See page 19.) 19 Connections Notes: • Refer to the owner’s manual of the connected equipment as well. • When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/ VCR away from the tuner and radio. • The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the DVD/VCR’s power cord. If you leave the amplifier power on, the speakers may be damaged. • When connecting to a TV using the Video or S-video jack, make sure that the Progressive indicator “ ” on the display window is not lit. If it is lit, the Video and S-video outputs do not feed the correct signals and you cannot see any picture. To turn off the Progressive indicator, select PROGRESSIVE scan Off (see page 66). Note: The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVD video picture performance. If you connect the DVD/VCR to your TV with the DVD OUT jacks, select the corresponding video input on your television to watch DVD video discs. TV or monitor with ColorStream® component video inputs To PR/CR video input To PR/CR VIDEO OUT Signal flow To wall outlet To audio inputs of the amplifier (red) (white) (red) (white) To Y VIDEO OUT To PB/CB VIDEO OUT To Y video input To PB/CB video input Audio system To ANALOG AUDIO OUT To SVIDEO OUT Component video cable (not supplied) To S-video input S-video cable (not supplied) When you make this connection, set the S-VIDEO/ COMPONENT Video selector switch to the desired position. And also you must select the corresponding video input on your TV. Audio cable (not supplied) S-video output An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has SVideo input, and does not have c...

Эта инструкция также подходит к моделям:
DVD-проигрыватели - SD-K531SU2 (1.95 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории