Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Video: The DVD player filters video signal, and converts it in the progressive output format appropriately. Suitable for playback of video content pictures. Film: The DVD player converts film content pictures in the progressive output format appropriately. Suitable for playback of film content pictures. The progressive output feature will be most effective under this selection. Note Depending on the disc, pictures may be cut off or doubled. In this case, select “Video.” Function setup 57 Function setup Setting details When you select “Analog 6Ch”: Make the following settings for the built-in 5.1ch surround decoder. 1) Select an item by moving the cursor control ( / ), and press the ENTER button. 2) Make the settings (see below) by moving the cursor control ( / / / ), and press the ENTER button. C.S.Speaker Size Small: When the center speaker or surround speakers cannot reproduce low frequency signals below 120 Hz. Large: When the center speaker and surround speakers can reproduce low frequency signals below 120 Hz. C(Center) Speaker Off: When center speaker is not connected. On: When you connect center speaker. S(Surround) Speaker Off: When surround speakers are not connected. On: When you connect surround speakers. Subwoofer Off: When a sub woofer is not connected. On: When you connect a sub woofer. Note Depending on the sound in a DVD audio disc, speakers may output each sound of recorded channels, regardless of your settings. Audio Out Select DVD-V VCDDVD-A CD Select the output sound format corresponding to your system connection. For details of sound recording systems, see 43 . Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder. 21 22 The DVD player outputs digital audio information in the bitstream format when you play a DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or MPEG2 recording system. Analog 6ch: Select when connected to an AV amplifier equipped with 5.1ch audio inputs. 23 The next screen will detail the appropriate settings. Analog 2ch: Select when connected to a TV, or Dolby Pro Logic or stereo system via the analog audio jacks. 18 19 21 PCM: Select when connected to a 2 channel digital stereo amplifier. 23 The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. Audio Dynamic Range Control Karaoke Vocal CD Attenuation Audio Out Select Bitstream On Off Off ABC Analog 6ch C (Center) Speaker S (Surround) Speaker Subwoofer Center Channel Delay Surround Channel Delay Test Tone C. S. Speaker Size Large On On On 0msec 5msec ABC Function setup Setting details When you select “Analog 6Ch”: Make the following settings for the built-in 5.1ch surround decoder. 1) Select an item by moving the cursor control ( / ), and press the ENTER button. 2) Make the settings (see below) by moving the cursor control ( / / / ), and press the ENTER button. C.S.Speaker Size Small: When the center speaker or surround speakers cannot reproduce low frequency signals below 120 Hz. Large: When the center speaker and surround speakers can reproduce low frequency signals below 120 Hz. C(Center) Speaker Off: When center speaker is not connected. On: When you connect center speaker. S(Surround) Speaker Off: When surround speakers are not connected. On: When you connect surround speakers. Subwoofer Off: When a sub woofer is not connected. On: When you connect a sub woofer. Note Depending on the sound in a DVD audio disc, speakers may output each sound of recorded channels, regardless of your settings. Audio Out Select DVD-V VCDDVD-A CD Select the output sound format corresponding to your system connection. For details of sound recording systems, see 43 . Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder. 21 22 The DVD player outputs digital audio information in the bitstream format when you play a DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or MPEG2 recording system. Analog 6ch: Select when connected to an AV amplifier equipped with 5.1ch audio inputs. 23 The next screen will detail the appropriate settings. Analog 2ch: Select when connected to a TV, or Dolby Pro Logic or stereo system via the analog audio jacks. 18 19 21 PCM: Select when connected to a 2 channel digital stereo amplifier. 23 The DVD player outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system. Audio Dynamic Range Control Karaoke Vocal CD Attenuation Audio Out Select Bitstream On Off Off ABC Analog 6ch C (Center) Speaker S (Surround) Speaker Subwoofer Center Channel Delay Surround Channel Delay Test Tone C. S. Speaker Size Large On On On 0msec 5msec ABC 58 Adjusting the delay time: When enjoying 5.1ch surround playback, it is ideal to choose a listening position that is the same distance from each speaker. By adjusting the delay time of the center/surround speakers...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SD-9200N (1.6 mb)