Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
coaxial cable 35 39 To digital audio input Notes • DO NOT connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM AUDIO OUT jack of the DVD video player. • Connect the BITSTREAM/PCM AUDIO OUT jack of the DVD video player to the “COAXIAL” input of a Receiver or Processor. • Refer to the owner’s manual of the connected equipment as well. • When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged. Connections 19 Basic playback CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Basic playback CAUTION Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. Playing a Disc This section shows you the basics on how to play a disc. POWER PLAY PAUSE SKIPOPEN/CLOSE STOP 3 PAUSE STOP POWER indicator DVD display 1 2 4 Basic playback DVD CD Preparations • When you want to view a disc, turn on the TV and select the video input connected to the DVD video player. • When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to the DVD video player. Initial set-up Make the following settings on the display. On-Screen Language: TOSHIBA Select the appropriate TV Shape FIRST SETUP On-Screen Language 4:3LB ENGThank you for your purchase of this TOSHIBA DVD Player. Please make a selection on-screen language. for On-Screen Language and your TV Shape and press ENTER button on your remote control. TV Shape: Select a picture size according to the aspect ratio of your TV. (See 38 for details.) 1 Press / to select “On-Screen Language,” and press ENTER. 2 Select a language using / , and press ENTER. 3 Press to select “TV Shape,” and press ENTER. 4 Select a picture size using / , and press ENTER. 5 Finally press SETUP. All your selections are entered and the display disappears. To change your settings, see “Customizing the Function Settings.” 35 Press POWER. The DVD video player turns on and the POWER indicator on the player illuminates. When the DVD video player is turned on for the first time, an initial set-up display appears. See “Initial set-up” and make the proper settings before proceeding to step 2. Press OPEN/CLOSE. The disc tray opens. Place the disc on the disc tray. With the playback side down • There are two different disc sizes. Place the disc in the correct guide on the disc tray. If the disc is out of the guide, it may damage the disc and cause the DVD video player to malfunction. • Do not place a disc which is unplayable in this DVD video player. Press PLAY. The disc tray closes and playback starts. If you insert a DVD video disc that contains a top menu, a menu may appear. See “Locating a title using the top menu.” 24 • You may need to press the TOP MENU or MENU button to display disc menu (depending on the actual DVD video disc.) 1 2 PLAY 3 4 OPEN/CLOSE POWER 20 2 1 PAUSE/STEP 4 STOP MENU ENTER / SETUP TOP MENU To obtain a higher quality picture Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. While the amount of noise depends on the TV you use with this DVD video player, you should generally reduce the sharpness adjustment on your TV when viewing DVD video discs. About DVD CD The DVD CD icons on the heading bar show the playable discs for the function described under that heading. DVDCD : You can use this function with DVD video discs. : You can use this function with audio CDs. To pause playback (still mode) Press PAUSE/STEP during playback. PAUSE/STEP To resume normal playback, press the PLAY button. • Sound is muted during still mode. To stop playback Press STOP. STOP To remove the disc Press OPEN/CLOSE. Remove the disc after the disc tray OPEN/CLOSE opens completely. About the screen saver If you pause a picture of a DVD video disc and leave it still for a long while, the screen saver of the DVD video player automatically appears (when “Screen Saver” is set to “On” 40 ). To turn off the screen saver, press the PLAY button. Automatic Power Off function If the DVD video player is stopped, or the screen saver is engaged for approximately 20 minutes, the DVD video player will automatically turn itself off. Basic pla...
Эта инструкция также подходит к моделям:DVD-проигрыватели - SD-1600U (1.11 mb)