Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
When the video signal is blocked, the TV screen shows no picture during audio playback. Press the PURE AUDIO button on the remote to switch the Pure Audio function on/off. • When the Pure Audio function is activated, the PURE AUDIO indicator lights up. Pressing the button again switches the Pure Audio function off and turns the indicator off. • When an operation for displaying the on-screen message (the display of the performed operation contents on the TV screen) or OSD is performed, the video signal is output temporarily. • With some DVD and VCD discs, the menu may be displayed. 3-26 Switching the audio language When a VCD or a DVD containing the recording of audio in multiple languages is played, the language used in the voice can be switched over. (The audio language can also be switched by the OSD operation. -[el Press the AUDIO button during playback to display the "SOUND" OSD. Each further press of the button switches the displayed (Audio icon). • If the on-screen message or OSD is displayed outside the TV screen when using a widescreen TV or similar monitoring device, set the "OSD Position" setting to " Cinema". f • With a DVD AUDIO disc, an audio language number can be selected from up to 2 numbers. • With a DVD VIDEO disc, an audio language number can be selected from up to 8 numbers. • With VCD, "Stereo", "L", "R" or "L+R" can be selected. • The default audio language set by the user is selected when the power is turned on or the disc is changed. If the default language is not contained in the disc, the priority language defined for the disc will be played back. • The above operation is not available in stop mode. It is also unavailable with ordinary music CDs (CD-R, CD-RW). 45: 50 36 Chapter 4 : OSD Operation 4-1 Introduction The operations described in this chapter allows the user to perform operations and settings by referring to the OSD (On-Screen Display). As the OSD operation uses only the specific buttons on the remote, the user can enjoy the functions of the player even before memorizing the functions of all buttons. This chapter is composed of the following sections. Basic OSD Operation............................................... "MAIN" OSD Operation............................................ "SOUND" OSD Operation........................................-IP "VISUAL" OSD Operation.........................................-t • If the on-screen message or OSD is displayed outside the TV screen when using a widescreen TV or similar monitoring device, set the "OSD Position" setting to "Cinema". -Cf • The OSD cannot be displayed when DVD is played by menu playback. It may also be unavailable with certain discs. • The "SOUND" OSD and "VISUAL" OSD can be displayed only in a play mode. 37 Chapter 4: OSD Operation 4-2 Basic OSD Operation Various operations can be performed by selecting the OSD icons on the TV screen using the cursor button on the remote. Operation procedure 1. Press the ON SCREEN button to display OSD. "MAIN" OSD : a ^ TOTAL ■■28: 40 J3 (DV-5900M) Only the "MAIN" OSD can be displayed when the button is pressed in stop mode. (The up and down arrows shown in the above figure are not displayed.) When the button is pressed in a play mode, the OSD can be changed by pressing the cursor up/down button. "SOUND" OSD - ® h IBC I m i (DV-5900M) "VISUAL" OSD 1 J3 r- £ (DV-5900M) • If the on-screen message or OSD is displayed outside the TV screen when using a widescreen TV or similar monitoring device, set the "OSD Position" setting to "Cinema". -[f Select an OSD icon by pressing the cursor up/down button, then press the ENTER button to display the pull-down menu. • Press the cursor button to move the cursor. But the cursor cannot be moved to the icons of currently unavailable functions. • The OSD includes icons with a variety of functions. The displayed icons are variable depending on the player status and played disc. • When the cursor is located on the left or right end, if you attempt to move the cursor toward the outside, the cursor will move to the opposite end. • To clear the OSD display, move the cursor to the EXIT icon and press the ENTER button. (The same effect can also be obtained by pressing the ON SCREEN button.) From the displayed pull-down menu, select the desired item by pressing cursor button up/down button or by inputting the desired item number using 0 to 9 , +10 and +100 button. Example of pull-down menu display: (DV-5900M) Example of menu display when a number is input: Q Disc Title Chapter ^ total ^ Main 5 3 3H IH28:4 0 Play Set (DV-5900M) When a group, title, chapter, track, folder, or file number is input using numeric buttons, the pull-down menu display changes and the input number blinks in it. (The figure on the right of the input number shows the number of chapters in the disc.) If you commit a mistake in the numeric button input, press the RETURN button and restart the input from the beginning. • When ...
Эта инструкция также подходит к моделям:DVD-проигрыватели - DV-5050M (1.23 mb)
DVD-проигрыватели - DV-5900M (1.23 mb)