Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
1 1 On 2 2 Off To return to the previous menu screen Press the RETURN key. To exit initial setup Select “0 Exit” in the initial setup screen. Changing the initial setup DVF-9010 (En/E) 46 Changing initial setup [5 FL Display] 1 Perform steps 1 to 3 of the procedure in “Basic operation for changing the initial setup”. q 2Select the brightness item. Operations ENTER A 1 8 The setup completes and the initial setup screen appears again. RC 1Select an item with the joystick (%, .). 2Press the ENTER key. FL Display 1 Bright 2 Dim 3 Dim During DVD/VCD Play(Auto) Press RETURN to cancel Each press of the joystick (%, .) switches the items as follows. 1 1 Bright : Sets the FL display always bright. 2 2 Dim : Sets the FL display always dim. 3 3 Dim During DVD/VCD Play (Auto) : Sets the FL display dim only during playback of a DVD or VCD. OThe FL display becomes temporarily bright during slow playback, forward search and reverse search. To return to the previous menu screen Press the RETURN key. To exit initial setup Select “0 Exit” in the initial setup screen. Changing the initial setup DVF-9010 (En/E) Changing initial setup [6 TV Aspect] 47 1 Perform steps 1 to 3 of the procedure in “Basic operation for changing the initial setup”. q 2Select the aspect ratio of your TV. 1 4:3 2 16:9 Press RETURN to cancel Select your TV aspect Each press of the joystick (%, .) switches the items as follows. 11 4:3 22 16:9 ENTER A 1 8 RC 1Select an item with the joystick (%, .). 2Press the ENTER key. Setting details [1 4:3] (Factory setup) Select this item when the player is connected to a TV with standard aspect ratio. OWide-screen software with pan & scan specification is played in a panned & scanned screen (with the left and right sides cut off). Operations OWide-screen software with pan & scan specification is played in a letterbox screen (with black stripes on the top and bottom). [2 16:9] Select this item when the player is connected to a wide- screen TV. Wide-screen software is played in a full wide- screen. OSet the picture mode of the wide-screen TV to “FULL”. To return to the previous menu screen Press the RETURN key. To exit initial setup Select “0 Exit” in the initial setup screen. Changing the initial setup DVF-9010 (En/E) 48 Changing initial setup [7 Digital Audio Output] 1 Perform steps 1 to 3 of the procedure in “Basic operation for changing the initial setup”. q 2Select the item to be set. ENTER A 1 8 RC 1Select an item with the joystick (%, .). 2Press the ENTER key. Each press of the joystick (%, .) switches the items as follows. 1 1 LPCM (DVD) : When playing a DVD with linear PCM recording, whether the playback signal is to be converted into a 48 kHz/16-bit signal and output at the digital audio output (optical/ coaxial) or not can be selected. 2 2 Dolby Digital : When playing a DVD with Dolby Digital (AC-3) recording, the format of the signal output from the digital audio output (optical/coaxial) can be selected (from bitstream and PCM). 3 3 MPEG : When playing a DVD with MPEG recording, the format of the signal output from the digital audio output (optical/ coaxial) can be selected (from bitstream and PCM). 4 0 Exit : Exits the current screen. 3Select the desired option. 1Select an item with the joystick (%, .). 2Press the ENTER key. ENTER A 1 8 RC The setup completes and the initial setup screen appears again. Setting details When [1 LPCM (DVD)] is selected: 1 Off (Factory setup) Only the linear PCM audio digital signal with 48 kHz/16-bit recording is output. No digital signal is output during playback of a DVD with 48 kHz/ 20-bit or 24-bit or 96 kHz linear PCM recording. 2 PCM When a DVD with 48 kHz/20-bit or 24-bit or 96 kHz linear PCM recording is played, the signal is converted into a 48 kHz/16-bit signal and output at the digital outputs. OThe digital output of the PCM audio becomes a 48 kHz/16-bit or lower signal because of the consideration for the copyright. When [2 Dolby Digital] is selected: 1 Bitstream (Factory setup) When a DVD with Dolby Digital (AC-3) recording is played, the Dolby Digital (AC-3) bitstream (2- to 6-channel) audio is output. Select this option when a Dolby Digital (AC-3) decoder is connected to the player. 2 PCM When a DVD with Dolby Digital (AC-3) recording is played, the signal is converted into a 48 kHz/16-bit signal and output at the digital outputs. When [3 MPEG] is selected: 1 PCM The PCM (2-channel) signal is output. 2 Bitstream (Factory setup) The bitstream is output. Digital Audio Output 1 LPCM(DVD) Off 2 Dolby Digital Bitstream 3 MPEG Bitstream 0 Exit Operations To return to the previous menu screen Press the RETURN key. To exit initial setup Select “0 Exit” in the initial setup screen. Changing the initial setup DVF-9010 (En/E) Recommended setup for [7 Digital Audio Output] The recommended setup for [7 Digital Audio Output] is variable depending on the equipment connected to the digital audio output. Set up this item by referring to the following table. Digital Audio Outpu...