Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Rear of TV R V A1 Pr Pb Y Y Pb Pr L R L R VIDEO INPUT S-VIDEO INPUTAUDIO INPUTAERIAL COMPONENT VIDEO INPUT /PROGRESSIVE SCAN Rear of this unit (Basic connection) DVD exclusive out connection • Component Video connection 1. Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable (C). 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables (A2). • S-Video connection 1. Connect the S-VIDEO OUT jack on this unit to the S-Video input jack on the TV using the S-Video cable (S). 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. Progressive Scan connection • If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible. • If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 1. Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable. 2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables. Notes: • Set the Progressive to “On” on the setup menu for progressive signal, see page 17. • Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or S-VIDEO connection. Rear of TV Y Pb L R L R VIDEO INPUT S-VIDEO INPUTAUDIO INPUTAERIAL COMPONENT VIDEO INPUT /PROGRESSIVE SCAN SC A2 Rear of this unit (DVD exclusive out connection) Note: If the TV has an S-video input, connect the DVD player with the S-video cable. When using an S-video cable, do not connect the yellow video cable. Preparation 9 Connections (Continued) Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables. Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2 or DTS) 1. Connect one of this unit’s DIGITAL AUDIO OUT jack (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial) audio cable. 2. You will need to activate this unit’s digital output. (See “AUDIO” on page 18). Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Warning: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. Notes: • If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. • To see the audio format of the current DVD in the On-Screen Display, press AUDIO. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. Rear of this unit Y Pb Pr L R L R AUDIO INPUTDIGITAL INPUT COAXIAL Amplifier (Receiver) DVD exclusive out DVD/VCR OUT or Digital multi-channel connection (DVD exclusive out connecttion) Y Pb Pr L R L R Rear of this unit 10 Before Operation-VCR part Tuning in a video channel on your TV Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable. If you have used a SCART lead you will not have to tune your TV, simply select the AV channel. The AV channel is already pre-tuned for optimum video playback on your TV. Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa. 1. Turn on DVD+VCR and TV. 2. Set the vacant position 36 on your TV. 3. Press POWER on the remote control to enter the stand by mode (the clock indicator will be dimmed). 4. Press and hold PROG. (v vv or V VV) on the DVD+VCR for more than 4 seconds. RF 36 will appear in the display. The following picture will be displayed on the TV screen. Using your VCR for the very first time Following picture will display on the TV screen when you have just connected your video recorder for the very first time. To make tuning TV stations, please...