Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Plug one end of the antenna cable into the TV socket on the recorder and the other end into the antenna input socket on your TV set. ANTENNA INPUT L R AUDIO INPUT VIDEO INPUT SCART INPUT RF coaxial connection Connect the ANTENNA OUT jack on the recorder to the antenna input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The ANTENNA OUT jack passes the signal through from the ANTENNA IN jack. ghij k l a ANTENNA IN Connect the antenna to this terminal. b COMPONENT OUTPUT (Y PB PR) Connect to a TV with Y PB PR inputs. c AV 2 DECODER SCART jack Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.). d HDMI OUTPUT (Type A) HDMI output providing a high quality interface for digital audio and video. e Cooling fan f AC Power Cord Plug into the power source. g ANTENNA OUT Passes the signal from the ANTENNA IN jack to your TV/monitor. h OPTICAL (Digital audio output jack) Connect to digital (optical) audio equipment. i COAXIAL (Digital audio output jack) Connect to digital (coaxial) audio equipment. j S-VIDEO OUTPUT Connect to a S-Video Input on TV. k AUDIO OUTPUT (Left/Right) Connect to a TV with audio inputs. l AV 1 SCART jack Connect to a TV with SCART jack. 10 SCART connection Connections to Your TV • Make one of the following connections, depending on the capabilities of your existing equipment. • When using the COMPONENT OUTPUT jacks, set the Video Output Format option in the setup menu to YPBPR. When using the SCART jack, set the Video Output Format option in the setup menu to RGB. Tips • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below. • Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution – Make sure the recorder is connected directly to the TV. Tune the TV to the correct video input channel. – Do not connect the recorder’s AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. – Do not connect your recorder via your VCR. The DVD image could be distorted by the copy protection system. are not available. Rear of the recorder AUDIO INPUT SCART INPUT PrPbY COMPONENT VIDEO INPUT Rear of TV AC T S-VIDEO INPUT S 11 Hookup andSettings Connect the AV1 SCART jack on the recorder to the corresponding in jacks on the TV using the scart cable (T). Audio (Left/Right) Connection Connect the left and right AUDIO OUTPUT jacks of the recorder to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the recorder’s AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. S-Video connection Connect the S-VIDEO OUTPUT jack on the recorder to the S-Video in jack on the TV using the S-Video cable (S). Component Video connection Connect the COMPONENT OUTPUT jacks on the recorder to the corresponding input jacks on the TV using an Y PB PR cable (C). If your television is a high-definition or “digital ready” television, you may take advantage of the recorder’s progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder. Set the resolution to 576p using RES. button for progressive signal. Note: Progressive scan does not work with the S-VIDEO connection. Caution If the resolution is set to 720p or 1080i, the S-VIDEO OUTPUT and COMPONENT OUTPUT connections HDMI connection If you have an HDMI TV or monitor, you can connect it to this recorder using an HDMI cable. 1. Connect the HDMI OUTPUT jack on the recorder to the HDMI INPUT jack on an HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: • If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 19). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. • If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 19). • If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 19). To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs. • The arrow on the cable connector body should face up for correct alignment with the connector on the recorder. (Type A) • If there is noise or lines on the screen, please check the HDMI cable. Tip : When you use the HDMI connection, you can change the resolution (576i, 576p, 720p, or 1080i) for the HDMI output using RES. button. Caution Changing the resolution when the recorder is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the recorder and the...
Эта инструкция также подходит к моделям:DVD-проигрыватели - HDRF990 (3.84 mb)