Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
Rear of TV Connecting Video/Audio Cable TV Rear of the Unit Connecting SCART cable Connect the SCART OUT on the unit to SCART on TV with SCART cable. Rear of TV Scart Cable TV Rear of the Unit • You must set the [TV Output Select] option to [RGB] on the setup menu to use this connection. (See page 12) Connecting Component Video cable Connect the COMPONENT VIDEO OUT on the unit to COMPONENT VIDEO IN on TV with COMPONENT cable, such as Y with green, Pb with blue, and Pr with red. Rear of the Unit Component Cable TV Rear of TV • You must set the [TV Output Select] option to [YPbPr] on the setup menu to use this connection. (See page 12) • You should still connect the AUDIO cable between the unit and TV. Connecting 11 Connecting to an Connecting COAXIAL (digital audio) cable Amplifier Connect the COAXIAL (digital audio out) on the unit to Digital Audio IN (COAXIAL) on amplifier with Connecting Audio cable Connect the AUDIO OUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Audio Cable Amplifier/ Receiver Rear of the Unit COAXIAL cable. Connecting OPTICALCoaxial Cable Amplifier/ Receiver Rear of the Unit • If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 KHz] on the setup menu (See page 12). • If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 12). 2 12 System Setting 3 System Setting Setup When the unit is turned-on at the first time, you have to select the desired language. (optional) Adjust the settings You can change the settings of the player in the [SETUP] menu. 1. Press SETUP. 2. Select the first setup option using ws and press d to move to the second level. 3. Select a second setup option using ws and press d to move to the third level. 4. Select a desired setting using ws and press ENTER to confirm. 5. Press SETUP to escape from setup menu. [LANGUAGE] Menu Menu Language/Disc Audio/Disc Subtitle/Disc Menu Select and set the language you prefer. [DISPLAY] Menu TV Aspect Select and set TV aspect ratio according to your TV type and preference. [4:3]: Standard TV type [16:9]: Wide TV type Display Mode Select and set Display Mode according to your preference. Display Mode works only when the TV Aspect mode is 4:3. [Panscan]: Display full screen with cut non- main scene on TV. [Letterbox]: Display wide screen with black stripe at top and bottom on TV Progressive Scan Check whether your TV can accept the progressive signal. If your TV accepts it, you can enjoy accurate color with high quality by selecting [On]. If there is any error after setting to Progress Scan, you have to initialize the unit by pressing and holding STOP for five seconds. TV Output Select Select an option according to the TV connection type. [RGB]: When your TV is connected with the SCART jack. [YPbPr]: When your TV is connected with the Component Video Out jacks on the unit. [AUDIO] Menu Set the player’s Audio options according to various disc output type you use. Dolby Digital / DTS / MPEG Select the type of digital audio signal to use the DIGITAL AUDIO OUT jack. [Bitstream]: Select to connect DIGITAL AUDIO OUT jack to an amplifier with Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select to connect DIGITAL AUDIO OUT jack to an amplifier without Dolby Digital or MPEG decoder. [Off ] (for DTS): Select to connect DIGITAL AUDIO OUT jack to an amplifier without DTS decoder. Sample Freq. (Frequency) Selects the sampling frequency of the audio signal between [48KHz] and [96KHz]. System Setting 13 DRC (Dynamic Range Control) To adjust the volume level by itself when Audio level reaches to more than the specific level (Dolby Digital only). Vocal (DVX690 only) To mix the vocal with music using the multichannel karaoke DVD. [LOCK] Menu Move to [Area Code] by pressing d. Press ENTER after input the 4-digit password. Input the same 4-digit with password again to verify and press ENTER. The Rating and Password menu will be activated. Rating Input the 4-digit password and press ENTER. Select the level from 1(Kids) to 8 (Adult). Change Password Input the former 4-digit password. Input the new 4-digit password and input it again to verify. If you forget the password Remove the disc. Input “210499” on Setup menu and press ENTER. The password will be cleared. Area Code To input the standardized area code refer to the Area Code List on page 18. [OTHERS] Menu B.L.E (Black Level Expansion) Select [On] or [Off ] to expand the black level or not. It just operates when TV system is set to NTSC. REC Bitrate (DVX697K only) To select bitrate when you record from Audio CD to USB directly. Higher bitrate gives better sound quality. For detailed recording method, see page 16. Score (DVX697K only) The score can be displayed after singing a song with microphone. Select [On] in Score to use this function. The score is displayed only when a chapter, titl...