Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. DivX (R) is a registered trademark of DivX , Inc., and is used under license. 3 DV556KH-SP.AUKRLLK_1/19/10 11:45 AM Page 4 Hooking up the unit Hooking up the unit Audio and Video Connection The unit Audio/Video jacks are color coded (yellow for video, and white for left audio). If your TV has only one input for audio (mono), connect it to the left (white) audio jack on the unit. Connect the AC Rear of DVD player Rear of TV power cord into the power outlet. BA A Component Video Connections Connect the COMPONENT(VIDEO)/PROGRESSIVE YPBPR) OUT jacks on the unit to the corresponding input jacks TV using a Video/YPbPr cable. • You will still need to connect the left and right audio TV, or digital audio cable to your stereo. Resolution Setting • You can change the resolution for component video output. Press RESOLUTION repeatedly to select the desired resolution - 576i(576p(480p), 720p, 1080i, 1080p. • For 720p, 1080p and 1080i resolution on the component video output, only non-copy protected discs can be played back. If the disc is copy proteced,it will be displayed at the 576p(480p) resolution. • Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture re-appears. Digital Audio Output Connection B Connect one of the unit’s DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jacks to the corresponding jack on your amplifier. • If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. • To see the audio format of the current disc in the on-screen display, press AUDIO. • This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. 4 DV556KH-SP.AUKRLLK_1/19/10 11:45 AM Page 5 Hooking up the unit HDMI Connection Connect the HDMI OUT jack on the unit to the HDMI input jack on an compatible TV using an HDMI cable (Version 1.2). Rear of DVD player Rear of TV Hooking up the unit - more you can do Resolution Setting You can change the resolution for HDMI output. Press RESOLUTION repeatedly to select the desired resolution - 576i(480i), 576p(480p), 720p, 1080i, 1080p. The resolution may not be selected depending on the connection or TV. Note for 1080p resolution The unit is able to provide a 1080p full TVs in the market today. However, there are some 1080p TVs available from certain companies that are limited in the types of 1080p Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display an image from this unit. About HDMI HDMI (High Definition Multimedia Interface) supports both single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of (High-bandwidth Digital Content Protection). HDCP is used to protect digital content transmitted and received. HDMI has the capability to support standard, enhanced or high-definition plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. Notes on HDMI connection • If your TV is not capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 8). • If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 8). • Depending on your TV, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press RESOLUTION repeatedly until the picture re-appears. • Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. • When you connect a HDMI or DVI compatible device, make sure of the following: - Try switchin...