Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Sample Freq. (Frequency) – Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format. Speaker Setup – Select an option according to the analog audio connection. [2 Ch]: Select when a 2 Channel stereo system is conected to this unit. [5.1 Ch]: Select when a 5.1 Channel surround system is conected to this unit. Press vV to select an option then press bB to adjust the setting. [Speaker]: Select a speaker that you want to adjust. [Size]: Select a size of the selected speaker. (Large, Small, None) A size cannot be selected depending on the selected speaker. [Volume]: Adjust the output level of the selected speaker. (-10dB - 0dB) . [Distance]: Select a distance to each speaker from the listening position. You cannot adjust Sub Woofer speakers. (1.0(3.28)m(ft) - 6.0(19.7)m(ft) ) [Test]: Select [All], a test signal is sent to each speaker. During testing, you can select a speaker and adjust volume setting. Select [Off] to stop the test. DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. 7 DV488-SE.AUKRLLK_4/16/09 10:09 AM Page 8 Adjust the lock settings You must set the [Area Code] option to option then press B. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. If you forget your password you can reset it. First, Display setup menu then input the 6-digit number “The “P CLr” appear in the display window and the password is deleted. Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Password – Sets or changes the password for lock settings. [New]: Enter a new 4-digits password using the numerical buttons ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area Code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. (See page 14) Adjust the others settings B.L.E. (Black Level Expansion) – To select the black level of playback pictures, set your preference and monitor’s ability. REC Bitrate – You can choose a bit rate for USB direct recording. Higher bit rate gives the better sound quality but uses more space on the USB Flash Drive. For USB direct recording, see page 13. Score – You can view the score after singing a song using microphone. Select [On] to use this feature. The score appears only when a chapter, title or track is fully finished. Fanfare sounds with high score. DivX(R) VOD – We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX ® VOD service. For more information, visit Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit. All the downloaded videos from DivX ® VOD can only be played back on this unit. Displaying Disc Information ON REMOTE 1 Press DISPLAY: DISPLAY 2Select a item: v vv V VV 3 Adjust the Display menu settings: b bb B BB / ENTER 4To return the exit: DISPLAY Displaying Disc Information - more you can do You can select an item by pressing vV and change or select the setting by pressing bB or using the numbered buttons (0-9). Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles Symbol Used in this Manual All discs and files listed below Audio CDs DVD and finalized DVD± R/RW CD-G discs MP3 files DivX files WMA files WMA MP3 DVD ALL DivX CD-G ACD 8 DV488-SE.AUKRLLK_4/16/09 10:09 AM Page 9 Playing a Disc ON REMOTE 1 Open the disc tray: ZZ OPEN/CLOSE 2Insert a Disc: - 3Close the disc tray: ZZ OPEN/CLOSE 4 Start playback: NN PLAY 5To stop playback: xx STOP Playing a Disc - more you can do Stops the playback The unit records the stopped point depending on the disc. “ Xx xx ” appears on the screen briefly. Press PLAY ( N NN) to resume playback (from the scene point). If you press STOP ( x xx ) again or unload the disc (“ x xx ” appears on the screen), the unit will clear the stopped point. ( X XXx xx = Resume Stop, x xx = Complete Stop) The resume point may be cleared when a button is pressed (for example :POWER, OPEN/CLOSE, etc). Playing a DVD that has a menu DVD Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B or number button to highlight an option. Press ENTER to select. Playing a DVD VR disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. When you insert a DVD VR disc, the menu will appear on the screen. Use vV to select a title then press P...