Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
[Start]: Start the channel scanning. Program Edit– This option allows you to add channels and edit preset channels. [Edit]: Displays the screen which show preset channel list and channel editing options. (page 13) Clock Set– The clock must be set in order to use [Timer record]. TV Aspect – Selects the aspects ratio of the connected TV. [4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen. [4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit. [16:9 Wide]: Select this when connecting to a wide-screen TV. AV2 Connection – You can connect a decoder or the other device to the AV2(DECODER) jack on the rear panel. [Decoder]: Select this when you connect a PAY-TV or Canal Plus decoder to the AV2(DECODER) jack on the unit. [Other Device]: Select this when you connect a VCR or similar recording device to the AV2(DECODER) jack on the unit. Video output format – Select an option according to the TV connection type. [YPbPr]: When your TV is connected to the COMPONENT OUTPUT jacks on the unit. [RGB]: When your TV is connected to the SCART jack on the unit. Power Save mode – Selects whether this unit is in power save mode when the power is turned off. This option is not available when a timer recording is set. [ON]*1: The front panel display is off and only signals arriving at the antenna input are passed through when the unit is turned off. [OFF]: Turns off the [Power Save Mode]. *1 If you turns off the unit while receiving encoded signals, the power save mode does not work Factory Set – You can reset the unit to all its factory settings. Some options cannot be reset (Rating, Password, and Area Code). The auto setup menu appears on the screen after the factory settings. 15 Adjust the language settings Display Menu – Select a language for the Setup menu and on-screen display. Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle. [Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 29. If you make a mistake while entering number, press CLEAR repeatedly to delete numbers one by one then correct it. [OFF] (for Disc Subtitle): Turn off Subtitle. Adjust the audio settings Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. [Bitstream] – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio component with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG) – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio component without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS) – Select this when you connect this unit’s DIGITAL AUDIO OUTPUT jack to an audio component without a built-in DTS decoder. Sampling Freq. (Frequency) – Selects the sampling frequency of the audio signal. [48 kHz]: 48 kHz]: The digital audio signals are output in their original format upto 48 kHz. In case of DVD with 96KHz sampling, Output is converted to 48kHz. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. [96 kHz]: The digital audio signals are output in their original sampling format. DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only. Adjust the lock settings To access the Rating, Password or Area Code options, you must enter the 4digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR repeatedly to delete numbers one by one then correct it. If you forget your password, you can reset it. Displays the SETUP menu. Input ‘210499’ and select [OK] to confirm. The password has now been cleared. Rating – Select a rating level. The lower the level, the stricter the rating. Select [No Limit] to deactivate the rating. Set Password – Changes or deletes the password. [Change]: Enter the new password twice after entering the current password. [Delete]: Delete the current password after entering the current password. Area code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 29. 16 Adjust the recording settings Adjust the disc settings Disc Record Mode – Select the picture quality for recording from XP, SP, LP, EP or MLP. See recording time of each mode on page 32. [XP]: Highest picture qualilty. [SP]: Standard ...