Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
yProgressive and lossless compression photo image files are not supported. Notes of USB Device (DP522/DP527/DP527C only) yThis unit supports USB device with FAT16 or FAT32 format. yDo not extract the USB device during operation (play, etc.). yA USB device which requires additional program installation when you have connected it to a computer, is not supported. yUSB device: USB device that supports USB1.1 and USB2.0. yMovie, music and photo files can be played. For details of operations on each file, refer to relevant pages. yRegular back up is recommended to prevent data loss. yIf you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. ySome USB device may not work with this unit. yDigital camera and mobile phone are not supported. yUSB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. DP527-PU.ARUSLLK-ENG-1211.indd 7 2012-01-16 .... 9:54:29 1 1 Getting Started 8 Remote control • • • • • • • • • • a• • • • • • • • • • POWER (1): Switches the unit ON or OFF. OPEN/CLOSE (B): Opens and closes the disc tray. Numerical buttons: Selects numbered items in a menu. CLEAR: Removes a track number on the Program List. PROGRAM: Enters the program edit mode. • • • • • • • • • • b• • • • • • • • • • SCAN (c/v): Searches backward or forward. SKIP (C/V): Goes to the next or previous chapter / track / file. PAUSE/STEP (M): Pauses playback. PLAY (z): Starts playback. STOP (Z): Stops playback. • • • • • • • • • • c• • • • • • • • • • DVD MENU: Accesses or exits the DVD menu. TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • d• • • • • • • • • • A-B: Repeats a section. REPEAT: Repeats a chapter, track, title or all. ZOOM: Enlarges video image. KARAOKE (ECHO) (DP521/DP527/DP527C only): Accesses or exits KARAOKE menu. Battery Installation Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 4 and 5 matched correctly. DP527-PU.ARUSLLK-ENG-1211.indd 8 2012-01-16 .... 9:54:31 9 Front panel 1 Getting Started .................................. a Disc Tray b MIC. (Microphone jack) (DP521/DP527/DP527C only) c VOL. (Volume controller) (DP521/DP527/DP527C only) d Display window Rear panel e Remote sensor f B (Open/Close) N (Play/Pause) Z (Stop) 1 (Power) g USB Port (DP522/DP527/DP527C only) 5 a Power Cord d VIDEO OUT b AUDIO OUT (Left/Right) e COMPONENT VIDEO OUT (Y PB PR) c DIGITAL AUDIO OUT (COAXIAL) DP527-PU.ARUSLLK-ENG-1211.indd 9 2012-01-16 .... 9:54:34 10 Connecting to your TV Connecting Component Video cable Connect the COMPONENT VIDEO OUT (Y PB PR) Connecting Video / Audio jacks on the unit to the corresponding input jacks Connecting 2 cable Connect the VIDEO/AUDIO OUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. on the TV using Component video cable, such as Y with green, Pb with blue, and Pr with red. yIf your TV accepts progressive format signals, you must use this connection and set [Progressive TV Video/Audio cable Rear of the Unit Rear of the Unit Component Cable TV Scan] to [On] on the setup menu. (See page 12) • You should still connect the AUDIO cable between the unit and TV. DP527-PU.ARUSLLK-ENG-1211.indd 10 2012-01-16 .... 9:54:36 11 Connecting 2 Connecting to an Amplifier Connecting Audio cable Connect the AUDIO OUT (L/R) on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Connecting COAXIAL (digital audio) cable Connect one of the unit’s DIGITAL AUDIO OUT (COAXIAL) jacks to the corresponding jack on your amplifier. OPTICALyIf your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 kHz] on the setup menu. yIf your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. yIf the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. yTo see the audio format of the current disc in the on-screen display, press AUDIO. yThis unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. , Note Amplifier/ Receiver Audio Cable Rear of the Unit Amplifier/ Receiver Coaxial Cable Rear of the Unit 2 Connecting to an Amplifier Connecting Audio cable Connect the AUDIO OUT (L/R) on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right...