Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
For details of operations on each file, refer to relevant pages. • Regular back up is recommended to prevent data loss. • If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. • Some USB device may not work with this unit. • Digital camera and mobile phone are not supported. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. 1 Getting Started DP527-PU.AKAZLLK-1241-ENG.indd 7 2012-03-06 .... 12:22:08 8 Getting Started 1 Getting Started Remote control • • • • • • • • • • a• • • • • • • • • • POWER (1): Switches the unit ON or OFF. OPEN/CLOSE (B): Opens and closes the disc tray. Numerical buttons: Selects numbered items in a menu. CLEAR: Removes a track number on the Program List. PROGRAM: Enters the program edit mode. • • • • • • • • • • b• • • • • • • • • • SCAN (c/v): Searches backward or forward. SKIP (C/V): Goes to the next or previous chapter / track / file. PAUSE/STEP (M): Pauses playback. PLAY (z): Starts playback. STOP (Z): Stops playback. • • • • • • • • • • c• • • • • • • • • • DVD MENU: Accesses or exits the DVD menu. TITLE: Accesses the disc’s title menu, if available. w/s/a/d: Navigates the menus. ENTER (b): Confirms menu selection. DISPLAY: Accesses or exits On-Screen Display. RETURN (x): Moves backward or exit the menu. AUDIO ([): Selects an audio language or audio channel. SUBTITLE (]): Selects a subtitle language. ANGLE (}): Selects a DVD camera angle, if available. SETUP: Accesses or exits the setup menu. • • • • • • • • • • d• • • • • • • • • • A-B: Repeats a section. REPEAT: Repeats a chapter, track, title or all. ZOOM: Enlarges video image. KARAOKE (ECHO) (DP521/DP527/DP527C only): Accesses or exits KARAOKE menu. Battery Installation Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 4 and 5 matched correctly. DP527-PU.AKAZLLK-1241-ENG.indd 8 2012-03-06 .... 12:22:09 Getting Started 9 Front panel 1 Getting Started .................................. a Disc Tray b MIC. (Microphone jack) (DP521/DP527/DP527C only) c VOL. (Volume controller) (DP521/DP527/DP527C only) d Display window Rear panel e Remote sensor f B (Open/Close) N (Play/Pause) Z (Stop) 1 (Power) g USB Port (DP522/DP527/DP527C only) 5 a Power Cord d VIDEO OUT b AUDIO OUT (Left/Right) e COMPONENT VIDEO OUT (Y PB PR) c DIGITAL AUDIO OUT (COAXIAL) DP527-PU.AKAZLLK-1241-ENG.indd 9 2012-03-06 .... 12:22:10 10 Connecting Connecting to your TV Connecting Component Video cable Connect the COMPONENT VIDEO OUT (Y PB PR) Connecting Video / Audio jacks on the unit to the corresponding input jacks Connecting 2 cable Connect the VIDEO/AUDIO OUT on the unit to VIDEO/AUDIO IN on TV with Video/Audio cable, such as VIDEO with yellow, AUDIO Left/Right with white/ red. on the TV using Component video cable, such as Y with green, PB with blue, and PR with red. yIf your TV accepts progressive format signals, you must use this connection and set [Progressive TV Video/Audio cable Rear of the Unit Rear of the Unit Component Cable TV Scan] to [On] on the setup menu. (See page 12) • You should still connect the AUDIO cable between the unit and TV. DP527-PU.AKAZLLK-1241-ENG.indd 10 2012-03-06 .... 12:22:12 Connecting OPTICALOPTICAL Connecting 11 Connecting to an Connecting COAXIAL (digital audio) cable Amplifier Connect one of the unit’s DIGITAL AUDIO OUT (COAXIAL) jacks to the corresponding jack on your 2 yIf the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. yTo see the audio format of the current disc in the on-screen display, press AUDIO. yThis unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. , Note Connecting Audio cable Connect the AUDIO OUT (L/R) on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Rear of the Unit Audio Cable Amplifier/ Receiver amplifier. Rear of the Unit Coaxial Cable Amplifier/ Receiver • If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq.] option to [48 kHz] on the setup menu. • If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. DP527-PU.AKAZLLK-1241-ENG.indd 11 2012-03-06 .... 12:22:13 12 System Setting 3 System Setting Settings When the unit is turned-on at the first time, you have to select the desired language. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 1. Press SETUP. 2. Use w/s to select the first setup option, and press d to move to the second level. 3. Use w/s to select a second setup option, and press d to move to the third level. 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your ...