Оценок - 2, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5m). Additional Information for HDMI When you connect a HDMI or DVI compatible device make sure of the following: -Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. -The connected device’s video input is set cor- rectly for this unit. -The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input. Not all HDCP-compatible HDMI or DVI devices will work with this player. -The picture will not be displayed properly with non-HDCP device. -This player does not playback and TV screen is changed to black screen. Rear of the player HDMI HDMI compatible TV H Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. Tips • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below. • Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Caution – Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel. – Do not connect the player’s AUDIO OUT jack to the phono in jack (record player) of your audio system. – Do not connect your player via your VCR. The image could be distorted by the copy protection system. Component Video Connection Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables (C). Tip: When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 17.) Video Connection Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable (V). Audio (Left/Right) Connection Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables (A). Rear of TV AUDIO INPUT VIDEO INPUT PrPbY COMPONENT VIDEO INPUT Rear of the player A CV 14 15 Installation andSetup Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 39 for details. Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right 2CH AUDIO OUT jacks on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using audio cables (A). Connecting to an Amplifier via Digital Audio Output (Optical or Coaxial) 1. Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in jack (OPTICAL O or COAXIAL X) on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. 2. You will need to activate the player’s digital out- put. (See “[AUDIO] Menu” on pages 20.) Connecting to an Amplifier via HDMI Output 1. Connect the player’s HDMI OUT jack to the cor- responding in jack on your amplifier. Use a HDMI cable (H1). 2. You will need to activate the player’s digital out- put. (See “[AUDIO] Menu” on pages 20.) Tip: Connect the amplifier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable (H2) if your amplifier has a HDMI output jack. Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the receiver manual and the logos on the front of the receiver. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD) Notes: You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using [SPDIF], [HDMI] and [Sampling Freq.] options on the setup menu (see page 20). With digital audio connection (SPDIF or HDMI), Disc Menu button sounds from the BD-ROM may not be heard if the [SPDIF] or [HDMI] option is set to [Primary Pass-Thru]. If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. To see the audio format of the current disc in the on-screen display, press AUDIO. AUDIO INPUT DIGITAL INPUT OPTICAL HDMI INPUT HDMI OUTPUT Amplifier (Receiver) Rear of the player A O H1 H2 HDMI HDMI compatible TV DIGITAL INPUT COAXIAL X 15 Installation andSetup Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. Note: Since many factors affect the type of audio output, see “The unit’s Audio Output Specifications” on page 39 for d...