Оценок - 1, средний балл: 5 ( )

Производитель: Samsung Размер: 2.15 mb Название файла: Язык инструкции:

For example, many disc makers do not bother to insert property information distinguishing 48X disc s from 32X disc s . Since the two types of discs have the same properties data , although they actually have different properties, it is often impossible to respond to the situation with a single write strategy. In order to ensure stable writing , it is necessary to downgrade the write speed. If discs from two different disc makers have the same write speed according to the labels , but actually have different write speed s , I i t is necessary to downgrade the write speed to ensure stable writing. Samsung' s Standards for Write Speed Restriction Write speed is downgraded for the sake of write stability , if high-speed Standards 1 discs available in the market have particularly bad properties data , or there are low-speed discs available under the same ID. Speed-restricted discs go through further examination and adjustments later. If high-speed discs are available under the same ID with as low-speed discs (speed restricted at present), the speed restriction is removed when Standards 2 the low-speed counterparts become no longer a una vailable in the market under the same ID. You may experience lower write quality in case if you use disc products by some disc makers which that are not registered with the product's firmware. Therefore, it is recommended that you use only discs by recommended companies . Even , and even if the write session is completed successfully, check the write quality before you put the disc in storage , especially in case of an important data backup. (Samsung is not responsible for any loss resulting from data backup failure.) We update the list of supported media on a regular basis through our firmware upgrades Select Languages English SH-S182M(TS-H652M) Category DVD Writer DVD : DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-ROM, DVD-Video, DVD+R (Dual), DVD-R (Dual), LightScribe DVD±R, DVD-RAM CD : CD-ROM, CD-R, CD-RW, CD-DA, CD+E(G) Usable Discs CD-MIDI, CD-TEXT, CD-ROM XA, Mixed Mode CD DISC CD-I, CD-I Bridge (Photo-CD, Video-CD), Multisession CD (Photo-CD, CD-EXTRA, Portforio) LightScribe CD-R Disc 4.72 Inch or 3.15 Inch (120mm or 80mm) Diameter Interface ATA/ATAPI (E-IDE) Port Interface Support PIO mode PIO Mode 4: 16.6MB/sec DMA mode Ultra DMA Mode 2: 33.3MB/sec CD-ROM 110ms (Random) ACCESS TIME (Random) DVD-ROM 130ms (Random) The entire label area Setting Titles only Titles and contents (including graphics) Disc Labeling Best Less than 4 min Less than 9 min Less than 36 min Time Normal Less than 3 min Less than 7 min Less than 28 min Draft Less than 2 min Less than 4 min Less than 20 min Media Type Write Read DVD+R CAV 18X (24.3MB/sec) CAV 12X (16.2MB/sec) DVD+RW Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec) DVD+R DUAL Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec) DVD-R DUAL Z-CLV 8X (10.8MB/sec) CAV 8X (10.8MB/sec) DVD-R CAV 18X (24.3MB/sec) CAV 12X (16.2MB/sec) DVD-RW Z-CLV 6X (8.1MB/sec) CAV 8X (10.8MB/sec) Data Transfer Speed DVD-ROM(Single) -CAV 16X (21.6MB/sec) (Max) DVD-ROM(Dual) -CAV 8X (10.8MB/sec) DVD-RAM CAV 12X(16.2MB/sec) CAV 12X(16.2MB/sec) CD-ROM -CAV 48X(7.2MB/s) CD-R PCAV 48X (7.2MB/sec) CAV 40X (6.0MB/sec) US-RW Z-CLV 32X (4.8MB/sec) CAV 40X (6.0MB/sec) HS-RW CLV 10X (1.5MB/sec) CAV 40X (6.0MB/sec) CD-RW CLV 4X (0.6MB/sec) CAV 40X (6.0MB/sec) Buffer Memory 2MB Drive Installation Horizontal / Vertical Temperature 41°F ~ 122°F (5°C ~ 45°C) Operating Environment Humidity 5% ~ 80% (RH) Size(Width x Height x Length) 5.83 X1.65 X 6.69 Inch (148.2 X 42 X 170mm) Weight 750g Note Does not support DVD-R for Authoring. Cannot playback or record on both sides of a two-sided disc simultaneously. The read/write capacity of the supported discs depends on the condition of the disc and the recording format of the drive. Therefore, the read/write quality may not be perfect. Severe vibration or external impact may decrease the quality of printed images. Please firmly place the product onto the PC before use. In case of disk identification error message, thoroughly clean the surface of the disk where the label is presented and then start printing. The quality of the printed image cannot be ensured if printing an image on the area which is already used for printing. For more information on the writing and duplicating the Lightscribe disk label, install Nero software and refer to the HELP section. Fcc information to the user This equipment has been tested and found to comply with the limits for a class B digital device. pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates. Uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications However. there is no guarantee t...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: